Settings

The board is configured with the Tyness Configurator software.

Always use the latest version of the Tyness Configurator and check that your Tyness has the latest version of the firmware. If necessary, carry out an update.

Configuration steps

1 – Click on “Config” of the board

2 – In the insert “Enabled channels”, define which inputs will be active.
To do so, select:
“Temperature 1” and/or “Temperature 2” and/or “Temperature 3” and/or “Temperature 4”

3 – Define the period of sending of the readings: “Temperature periodicity”

4 – Once all the values are entered, validate by clicking on “Write” If the operation is successful, a window displays “operation successful”.

Validate by clicking on OK

Your board is ready to operate.

Verification of the readings

It is possible to display the values of the readings by placing the mouse cursor on the image of the board.