Maximum number of registers in the table: 600 registers of 16 bits Compatible sensors and data:Ambiance: Temperature, humidity, brightness, presence, CO2.Tynode: Digital input counting, digital input status, digital input duration, analog measurement, temperature.SquidV2: Current, cumulative current.SquidPro: Reactive energy produced and consumed,

Connection to the Multitech The connection to the Multitech is established on the standard Modbus TCP port: port 502. The Multitech network parameters can be configured in the "Configuration" menu and in the "Network" section. Modbus Reading Data reading is performed using the read

The following steps describe how to configure the Multitech as a LoRa to Modbus TCP gateway. Start by connecting to the web interface of your Multitech. Provisioning Go to the "Provisioning" section. Enter a name for your sensor Select its type Enter its

This guide explains how to configure and use a Multitech as a LoRa to Modbus TCP gateway.

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com

The Multitech gateway is a key component in connected solutions developed by EWATTCH. Designed to meet the needs of companies in their energy transition, this gateway integrates advanced IoT technologies, including the LoRaWAN protocol, ensuring reliable and high-performance connectivity. Thanks

E-MULTITECH-CONDUIT-4G-ETH-EWATTCH : Multitech kit with 4G and Ethernet (EU) E-MULTITECH-CONDUIT-ETH-EWATTCH : Ethernet-only variant kit (EU) E-MULTITECH-CONDUIT-4G-ETH-EWATTCH-915Mhz : Multitech kit with 4G and Ethernet (USA) All kits include the necessary accessories: 1 x Multitech gateway compatible with Ewattch Cloud 1 x Power supply 1

Certifications Radio & EMC Compliance: CE Mark (EU), RED (EU), UKCA (UK), FCC (US) Safety: IEC 60950-1 Network: GCF Certified Cell Module Quality: MIL-STD-810G: High Temp, Low Temp, Random Vibration. SAE J1455: Transit Drop & Handling Drop, Random Vibration, Swept-Sine Vibration. IEC68-2-1: Cold Temp.

Failure to follow the instructions in this manual may release the manufacturer from liability. Any intervention on the product must be carried out by a qualified person. Product replacement must be carried out by a qualified person. The device must be used according

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com