Radio communication: LoRaWan LoRaWan mode: OTAA ADR: activated Messages confirmed: deactivated Periodic reconnection to the LoRawan network: deactivated Time between two radio communication of mesures: 10 minutes Activated measurements: Active energies

We are committed to providing extensive compatibility for our products, including the SQUID PRO, with various platforms in the market. We understand the importance of flexibility and interoperability for our customers, which is why we strive for seamless integration of

The SQUID Pro comes equipped with user-friendly and intuitive configuration software, specifically designed to facilitate the updating and customization of your electrical sub-metering device. With its micro-USB connection, you can easily connect the SQUID Pro to your computer and access

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com

MEASUREMENTS Energies: Active consumed, Active produced, Reactive positive, Reactive negative, Apparent Powers: Active, Reactive, Apparent Voltages : max 280V per phase Frequency : 50Hz or 60Hz Precision : 1% Uncertainty of measurement : +-50mV (Voltage) / +-10mA (current) RADIO COMMUNICATION Frequency

The Squid Pro transmits its data in a raw format over various LoRaWAN public and private networks. The section below shows you how to decode the frames (payloads) sent by the Squid Pro. Periodic Frames Periodic frames contain the data measured by

  Positioning of the product The product must be positioned in a way that does not make it difficult to operate disconnector devices.The product must be installed in an indoor environment. Mounting on DIN rail The product must be installed on a 35mm DIN

Electrical Sub-Metering with 12 Channels and LoRaWAN Wireless Communication Introducing the SQUID Pro, a revolutionary 12-channel energy meter for electrical sub-metering of your single-phase and three-phase installations. Capable of measuring and transmitting via LoRaWAN wireless communication: active power, reactive power, power factor,

KIT SQUID-PRO-915MHz : Kits including a SQUID-PRO-915Mhz and all necessary accessories: 1 power supply with DIN rail mounting 230VAC-24VDC (ref.: ALIM-RAIL-24V) 1 magnetic antenna for external mounting (ref.: ANTMAGNSUP-915MHz) Note: The kit does not include any current clamps. ACCESSORIES CURCLAMP-HC-S1 : Clip-on