The Ambiance sensor, thanks to its infrared sensor, is able to count the time during which a room, a corridor, or more generally an area is used. It transmits at regulatar interval this duration as well as its other measurements using

The AMBIANCE SENSOR transmits its data in a raw format over the different LoRaWAN™ public and private networks. The section below shows you how to decode the frames (PayLoad) sent by the AMBIANCE.   Periodic frames The periodic frames contain the data measured

POWER SUPPLY Voltage: 3.6 VDC Battery life: up to 10 years depending on use Total battery capacity: 5.2 Ah VOLTAGE USING EXTERNAL POWER (optional): 5 to 12 V DC (option requiring minimum order quantity)   MEASUREMENTS Temperature measurement Temperature: 5 to 60°C      

Manufacturer cannot be held responsible for failure by user to comply with the instructions in this manual. Any service performed on this product must be completed by a qualified individual. Replacement of this products must be performed by a qualified individual. Failure to

CEM EN 61000-6-2 :  Immunity for industrial environments EN 61000-6-3 :  Emissions for residential environments EN 55022 : Immunity IT equipment Radio EN 30022 Sécurité EN 61010 :  IT equipment

SQUID-HC-LORAWAN : The LoRaWAN™ version of the SQUID allows currents to be measured up to 600A. KIT-SQUID-HC-LORAWAN : Kits with a SQUID-HC-LORAWAN, and all necessary accessories: A power supply with attachment to a DIN rail 230 VAC-5VDC (ref: ALIM-RAIL-5V), and a magnetic antenna

The SQUID is a sensor equipped with 12 current measurement clamps which send measured current values by means of a wireless LoRaWAN link. The products sends the consumption index of the 12 clamps in Ah (in orange in the graph bellow)

Mounting and disassembly This equipment must be installed on a DIN 35mm rail mounted horizontally on the electrical panel. Make sure to snap the box properly into the DIN rail. Make provision for the location of 5 modules to install the product on