LoRaWAN™ Configuration The SQUID periodically transmits current measurements performed on his 12 measurement clamps in the form of consumption indexes (Ah) via a LoRaWAN™ radio link To be able to configure a SQUID on the LoRaWAN™ network, you must use the following

POWER SUPPLY Voltage : 5 VDC Camps available :  4 different sizes (10, 16, 24 et 36 mm) CONNECTIONS Measurement clamp inputs Number of inputs : 12 Maximum consumption : 0,5A Maximum current : 75A - 100A - 300A - 600A Accuracy : +-

Manufacturer cannot be held responsible for failure by user to comply with the instructions in this manual. Any service performed on this product must be completed by a qualified individual. Replacement of this products must be performed by a qualified individual. Failure to

  The ENVIRONNEMENT is a complete LoRaWAN™ sensor that can measure three different things: temperature and humidity, and CO2 as an option. This product can run on batteries, which allows for more flexibility in its positioning. In order to measure CO2, an EE893

Manufacturer cannot be held responsible for failure by user to comply with the instructions in this manual. Any service performed on this product must be completed by a qualified individual. Replacement of this product must be performed by a qualified individual. Failure to

CEM EN 61000-6-2 : Immunity for industrial environments EN 61000-6-3 : Emissions for residential environments EN 55022 : Immunity IT equipment Radio EN 30022 Sécurité EN 61010 :  Metering equipment

  AMBIANCE-LITE :  ENVIRONNEMENT sensor measuring temperature and humidity, including lithium 3.6V batteries, and communicating via LoRaWAN™.   Accessories : PILE-LITH-AA 3.6V AA Lithium battery. Capacity 2.7 Ah ALIM-RAIL-5V Power supply 230 VAC - 5 VDC. DIN RAIL mounting ALIM-BLOC-5V Power supply 230 VAC - 5 VDC compatible

Installation of the sensor Mounting This equipment can be mounted a variety of ways : screwing to the wall Option : using a double-sided adhesive In order to make installation easier, you must remove the rear part of the chassis using a screwdriver. The

The ENVIRONNEMENT periodically sens its sensor measurements via a LoRaWAN™ radio link. In order to configure the ENVIRONNEMENT for a LoRaWAN™ network, the encrypted identification code indicated on each product (DevEUI) is required. As well as the following two codes AppEUI and

POWER SUPPLY Voltage : 3.6 VDC Life span on battery powers : 5 years* Voltage using external power : 5 to 12 VDC   MEASUREMENTS Temperature measurement: Temperature : -40 to 60℃                   Accuracy : 0,5℃   Relative humidity: Humidity : 0 to 100%