Homologations et conformités
CEM EN 61000-6-2: Immunity for the industrial environment EN 61000-6-3: Emission for the residential environment EN 55022: Immunity IT equipment Radio EN 300220 Security EN 61010: Measuring device
Product cleaning
The product should be cleaned with a dry, soft, lint-free cloth. Remove encrusted deposits with a slightly damp cloth. Never use cleaners, alcohol or thinner.
Measures
The sensor allows up to 6 current measurements. The wiring method is shown below. Technical specifications are described in chapter 8 of this documentation.
Certifications and Compliance
EUROPE EMC EN 61000-6-2 : Immunity for industrial environment EN 61000-6-3 : Emission for residential environment EN 55022 : IT equipment immunity Radio EN 300220 : Electromagnetic compatibility and radio spectrum for short-range devices Safety EN 61010 : electrical test and measurement equipment Logos
Configuration and settings
Product configuration software is available. This allows you to configure and update the product. The procedure below describes how to connect to the product. Implementation Power the Tyness. Download the Configurator software. This software is available at the following link: https://www.ewattch.com/documentations-techniques/.
Contact
13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com
Technical Specifications
POWERSUPPLY Supply voltage : 5V±5% Power : 2,5W Current : 0,5A Supply cable length : 1 meter Supply voltage fluctuation : ±5% of nominal voltage ENVIRONMENTAL CONDITIONS Operating temperature : 5°C to 60°C Storage temperature : -20°C to +70°C Operating humidity
LoRaWAN Frame Description (Payloads)
A description of the radio exchange format is available for download at this address: Download payload format To facilitate the integration of products communicating via the LoRaWAN network, Ewattch has developed a payload decoder available at this address: Payload decoder
Installation and Implementation
Pré-requis : 1x TYNESS-ENERGYLINK or TYNESS-ENERGYLINK -4G : intelligent sensor communicating via LoRa or 4G Electrical equipment Slot available for mounting TyNess EnergyLink 50/60Hz 100-240VAC for the 5VDC power supply Access to the power supply of the main equipment or