Manufacturer is not responsible for user’s failure to comply with the instructions contained in this manual.Any service performed on this product must be completed by a qualified individual.Replacement of this product must be performed by a qualified individual.Failure to use

Radio communication: LoRaWan LoRaWan mode: OTAA ADR: activated Messages confirmed: deactivated Periodic reconnection to the LoRawan network: deactivated Time between two radio communication of mesures: 10 minutes CO2 threshlold for warning LED: 4 configured threshold, 1200ppm, 2000ppm, 3000ppm and

The Ambiance sensor, thanks to its infrared sensor, is able to count the time during which a room, a corridor, or more generally an area is used. It transmits at regulatar interval this duration as well as its other measurements using

It is possible to configure Ambiance using configuration software via USB. This software is downloadable on the site: https://ewattch-documentation.com/?page_id=2181&lang=en This section describes its use. Connection Start with running the software. Once the software is running, connect a micro USB cable to the Ambiance. Select the port

The AMBIANCE is a LoRaWAN™ complete sensor which can perform five types of reading: temperature, humidity, detection of presence, luminosity and optional CO2 reading. This product is battery-operated and therefore improves the freedom of positioning of the product. This sensor can

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges sales@ewattch.com www.ewattch.com

POWER SUPPLY Voltage: 3.6 VDC Battery life: up to 10 years depending on use Total battery capacity: 5.2 Ah VOLTAGE USING EXTERNAL POWER (optional): 5 to 12 V DC (option requiring minimum order quantity) MEASUREMENTS Temperature measurement Temperature: 5 to 60°C Precision: 0.4°C Long term stability: <

The AMBIANCE SENSOR transmits its data in a raw format over the different LoRaWAN™ public and private networks. The section below shows you how to decode the frames (PayLoad) sent by the AMBIANCE. Periodic frames The periodic frames contain the data measured

Installation of the sensor Mounting This device can be installed in several ways: screwed to the wall Option: perform double-sided mounting To simplify its installation, it is necessary to separate the rear part of the housing using a screwdriver. All you need to

AMBIANCE-LORAWAN AMBIANCE SENSOR LoRaWAN™ with reading of the temperature, humidity, level of presence, luminosity and optional CO2. It can be fitted with an alarm LED indicating a high CO2 level. This sensor has a version adding a survey feature enabling to obtain the