CEM EN 61000-6-2 : Immunity for industrial environments EN 61000-6-3 : Emissions for residential environments EN 55022 : Immunity IT equipment Radio EN 30022 Sécurité EN 61010 :  Metering equipment

AMBIANCE-LORAWAN : LoRaWAN™ AMBIANCE sensor measuring temperature, humidity, rate of presence, brightness and, in option, CO2. Accessoires : PILE-LITH-AA 3.6V AA Lithium battery. Capacity 2.7 Ah ALIM-RAIL-5V Power supply 230 VAC - 5VDC. DIN RAIL mounting ALIM-BLOC-5V Power supply 230 VAC - 5 VDC compatible with power socket ALIM-12V-BLOC Power

Mise en place du capteur Fixation       This equipment can be mounted a variety of ways : screwing to the wall Option : using a double-sided adhesive In order to make installation easier, you must remove the rear part of the

CEM EN 61000-6-2: Immunity for the industrial environment EN 61000-6-3: Emission for the residential environment EN 55022: Immunity IT equipment Radio EN 30022 Security EN 61010:  Measuring device

  Manufacturer is not responsible for user’s failure to comply with the instructions contained in this manual. Any service performed on this product must be completed by a qualified individual. Replacement of this product must be performed by a qualified individual. Failure to use

    AMBIANCE-LORAWAN AMBIANCE SENSOR LoRaWAN™ with reading of the temperature, humidity, level of presence, luminosity and optional CO2. It can be fitted with an alarm LED indicating a high CO2 level. This sensor has a version adding a survey feature enabling to obtain the

Installation of the sensor Mounting This device can be installed in several ways: screwed to the wall Option: perform double-sided mounting To simplify its installation, it is necessary to separate the rear part of the housing using a screwdriver. All you need to

  The AMBIANCE is a LoRaWAN™ complete sensor which can perform five types of reading: temperature, humidity, detection of presence, luminosity and optional CO2 reading. This product is battery-operated and therefore improves the freedom of positioning of the product. This sensor can

Radio communication: LoRaWan LoRaWan mode: OTAA ADR: activated Messages confirmed: deactivated Periodic reconnection to the LoRawan network: deactivated Time between two radio communication of mesures: 10 minutes CO2 threshlold for warning LED: 4 configured threshold, 1200ppm, 2000ppm, 3000ppm and

It is possible to configure Ambiance using configuration software via USB. This software is downloadable here. This section describes its use.   Connection Start with running the software. Once the software is running, connect a micro USB cable to the Ambiance. Select the port corresponding to