Description du produit
The TYNODE is a battery-operated LoRa® sensor, designed for easy positioning. There are three versions of the product available, depending on the measurements required. It can be equipped with 2 digital inputs, 2 remote PT100 temperature probes, or an analog
Configuration
Connecting to the Software The Tynode can be configured using the Tynode Configurator, a configuration software that can be downloaded here. This software allows you to configure transmission periods, radio communication settings, and view the network status and sensor measurements. The Tynode Configurator
Description de la mesure de température PT-100
The TYNODE sensor in its TYNODE-PT100 version allows for temperature measurement using 2 PT100 3-wire probes. The measurement range is from -100°C to 300°C. The configuration of this section is explained in the "Configuration" chapter.
Description de la mesure de comptage impulsionnel / entrée digitale
The TYNODE sensor in its TYNODE-DIGITAL version allows for the reading of any type of pulse-emitting meters. It measures the number of pulses, the current state of the input, and the activation duration of the meter being monitored. The TYNODE-DIGITAL
Description de la mesure analogique 0-10V ou 4-20mA
he TYNODE sensor in its TYNODE-ANALOG version allows for the measurement of an analog signal in the range of 4-20mA or 0-10V. This can include measurements such as flow rate, pressure, or level. The resolution of the analog measurement is 10uA
Communication radio
The TYNODE sensor transmits its data in a raw format on public and private LoRaWAN™ networks and on the LoraEwattch network. To obtain documentation on how to decode the frames (Payload) sent by the TYNODE, please contact us directly.
Caractéristiques techniques
POWER SUPPLY Voltage : 1x 3.6V replaceable battery (2700mAh) included with the sensor Battery Life : Up to 10 years depending on the measurement reporting frequency Total Battery Capacity : 2.7 Ah External Power Supply Voltage (optional) : 12 to
Dangers et avertissements
Failure to follow the instructions in this manual will not hold the manufacturer liable. Any intervention on the product must be performed by a qualified person. Product replacement must be done by a qualified person. The device must be used according to the
Homologations et conformités
EMC EN 61000-6-2 : Industrial environment immunity EN 61000-6-3 : Residential environment emissions EN 55022 : IT equipment immunity Radio EN 30022 Sécurité EN 61010: Measuring device The Tynode sensor is CE certified and RoHS compliant.