13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com

MEASUREMENTS Energies: Active consumed, Active produced, Reactive positive, Reactive negative, Apparent Powers: Active, Reactive, Apparent Current : 3000A max Voltages : max 290V per phase (voltage between phase and neutral) Frequency : 50H or 60Hz Precision : 1% RADIO COMMUNICATION Frequency

The Squid Pro transmits its data in a raw format over various LoRaWAN public and private networks. The section below shows you how to decode the frames (payloads) sent by the Squid Pro. Periodic Frames Periodic frames contain the data measured by

Before starting the installation of the SQUID Pro Rogowski, ensure that you use a 5VDC - 2A power supply positioned at the head to power the device. It is important to maintain and separate the wiring of Low Voltage Safety

Electrical Sub-Metering with 12 Channels and LoRaWAN Wireless Communication Introducing the SQUID Pro Rogowski, a revolutionary 12-channel energy meter for electrical sub-metering of your single-phase and three-phase installations. Capable of measuring and transmitting via LoRaWAN wireless communication: active power, reactive power, power

KIT SQUID-PRO-ROG : Kits including a SQUID-PRO-ROG and all necessary accessories: 1 power supply with DIN rail mounting 230VAC-5VDC (ref.: ALIM-RAIL-5V) 1 magnetic antenna for external mounting (ref.: ANTMAGNSUP) Note: The kit does not include any Rogowski coils. BOUCLE-100-MM : Rogowski

EMC EN 61000-6-2: Immunity for industrial environments EN 61000-6-3: Emission for residential environments EN 55022: IT equipment immunity Radio EN 300220 Safety EN 61010 : Electrical measuring equipment

Failure to comply with the instructions in this manual shall not hold the manufacturer liable. Any intervention on the product must be carried out by a qualified person. Product replacement must be performed by a qualified person. The device must be used in

Communication Radio: LoRaWan Mode LoRaWan: OTAA ADR: activé Messages confirmés: désactivé Reconnexion périodique au réseau LoRaWan: désactivé Test périodique du réseau LoRaWAN : Activé Temps entre deux transmissions radio des mesures: 10 minutes Mesures actives: Energies actives