First and foremost, the Tyness and the board must be disconnected. The board must be inserted on the connectors on the locations EXT.1 and/or EXT.2 of the Tyness. The wires of the probes must be inserted into the terminal blocks. In the case

Dimensions: 1 additional standard location for Tyness Connectors: 4 connectors type AVX série 9276, 3 terminals (2/10° à 8/10° – 24 à 18 AWG) ● resolution: 0.01°C ● accuracy: +-0.5°C ● measures: -100°C to +300°C Number of inputs: 4 PT100 or PT1000 inputs 3 wires Power supply: By the TYNESS Allocation of

Référence : TYNESS-OPT-PT100 TYNESS-OPT-PT1000 TYNESS-OPT-PT100 and TYNESS-OPT-PT1000 boards are additional boards comprising 4 temperature measurement inputs using 3-wire probes. The board is intended to be set up on our TYNESS sensors (ENERGY and MODULAR). It comprises 4 terminal blocks of type AVX series 9276, 3 terminals. The

Manufacturer is not responsible for user’s failure to comply with the instructions contained in this manual.Any service performed on this product must be completed by a qualified individual.Replacement of this product must be performed by a qualified individual.Failure to use

Radio communication: LoRaWan LoRaWan mode: OTAA ADR: activated Messages confirmed: deactivated Periodic reconnection to the LoRawan network: deactivated Time between two radio communication of mesures: 10 minutes CO2 threshlold for warning LED: 4 configured threshold, 1200ppm, 2000ppm, 3000ppm and

The Ambiance sensor, thanks to its infrared sensor, is able to count the time during which a room, a corridor, or more generally an area is used. It transmits at regulatar interval this duration as well as its other measurements using

It is possible to configure Ambiance using configuration software via USB. This software is downloadable on the site: https://ewattch-documentation.com/?page_id=2181&lang=en This section describes its use. Connection Start with running the software. Once the software is running, connect a micro USB cable to the Ambiance. Select the port

The AMBIANCE is a LoRaWAN™ complete sensor which can perform five types of reading: temperature, humidity, detection of presence, luminosity and optional CO2 reading. This product is battery-operated and therefore improves the freedom of positioning of the product. This sensor can

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges sales@ewattch.com www.ewattch.com

POWER SUPPLY Voltage: 3.6 VDC Battery life: up to 10 years depending on use Total battery capacity: 5.2 Ah VOLTAGE USING EXTERNAL POWER (optional): 5 to 12 V DC (option requiring minimum order quantity) MEASUREMENTS Temperature measurement Temperature: 5 to 60°C Precision: 0.4°C Long term stability: <