Description and usage

TYNESS-OPT-PT100 and TYNESS-OPT-PT1000 boards are additional boards comprising 4 temperature measurement inputs using 3-wire probes.

The board is intended to be set up on our TYNESS sensors (ENERGY and MODULAR).

It comprises 4 terminal blocks of type AVX series 9276, 3 terminals.
The serigraphy of the printed circuit board specifies the function of the terminal block.
At each transmission, the Tyness returns the instantaneous values of each input.

The board is powered by the Tyness.

Note: reading correction factors cannot be configured in this board.

Référence :
TYNESS-OPT-PT100
TYNESS-OPT-PT1000
SONDE-PT100_3M : PT100 probe Ø 4mm with a cable length of 3m
SONDE-PT100_4M : PT100 probe Ø 4mm with a cable length of 4m
SONDE-PT100_6M : PT100 probe Ø 4mm with a cable length of 6m
SONDE-PT100_10M : PT100 probe Ø 4mm with a cable length of 10m
SONDE-PT100_20M : PT100 probe Ø 4mm with a cable length of 20m