The board is configured with the Tyness Configurator software. Always use the latest version of the Tyness Configurator and validate that your Tyness has the latest version of the firmware. If necessary, carry out an update. Step 1 ● Click on “Config ” of

Optic board:                                     Optic sensor:                                        

BoardDimensions :1 additional standard location for TynessConnectors :2 connectors, 4 terminals type AVX series 9276 (2/10° to 8/10° - 18 to 24 AWG) rigid and flexible multi-strandsNumber of inputs :2 OPTIC-SENNSOR inputs 4 wiresAllocation of the terminal blocks :Pinout of the

The TYNESS-OPT-OPTIC is an assembly comprised of an additional board containing 2 inputs for recording the light pulses supplied by an LED and a light pulse sensor. The board can be fitted with a second optional sensor with reference OPTIC-SENSORThe function is used

Manufacturer is not responsible for user’s failure to comply with the instructions contained in this manual.Any service performed on this product must be completed by a qualified individual.Replacement of this product must be performed by a qualified individual.Failure to use

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.fr www.ewattch.com

It is possible to read with the Tyness Configurator software the values of the RMS current readings by the Tyness. To do so, position the mouse on the image of the board, and the readings will display. PAYLOAD DESCRIPTIONS A Tyness transmits its data

The board is configured with the Tyness Configurator software. Always use the latest version of the Tyness Configurator and validate that your Tyness has the latest version of the firmware. If necessary, carry out an update. Click on “Config” of the board

The Tyness and the board must be disconnected.The board must be installed carefully and with precision of connectors onthe locations EXT.1 and/or EXT.2 of the Tyness.In the case of the board fitted with connectors, the wires of the inputs must be

Allocation of the terminal blocks: