The TyNess EnergyLink is a versatile connected sensor that provides a universal solution that's easy to install and use. It provides a rapid response to the needs of customers who want to easily supervise and visualize the real-time consumption

TYNESS-ENERGY-LINK or TYNESS-ENERGY-LINK-4G: 1 x Tyness with current measurement with or without 4G module 1 x magnetic antenna for mounting outside the cabinet (ref.: ANTMAGNSUP) 1 x easy-link wiring module for DIN rail (ref.: TYNESS-EASY-LINK-CURR-CURR) CAUTION The kit must be

The manufacturer cannot be held responsible if the instructions in this manual are not followed. This product must be installed by a professional, in an indoor environment and in such a way as not to make it difficult to operate the

Radio communication: LoRaWan LoRaWan mode: OTAA ADR: activated Messages confirmed: desactivated Periodic reconnection to the LoRawan network: deactivated Time between two radio communication of mesures: 10 minutes Activated measurements: Active energies

We are committed to providing extensive compatibility for our products, including the SQUID PRO, with various platforms in the market. We understand the importance of flexibility and interoperability for our customers, which is why we strive for seamless integration of

The SQUID Pro Rogowski comes equipped with user-friendly and intuitive configuration software, specifically designed to facilitate the updating and customization of your electrical sub-metering device. With its micro-USB connection, you can easily connect the SQUID Pro Rogowski to your computer

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com

MEASUREMENTS Energies: Active consumed, Active produced, Reactive positive, Reactive negative, Apparent Powers: Active, Reactive, Apparent Current : 3000A max Voltages : 280V per phase Frequency : 50H or 60Hz Precision : 1% RADIO COMMUNICATION Frequency : 868MHz Maximum transmission power : 25mW

The Squid Pro transmits its data in a raw format over various LoRaWAN public and private networks. The section below shows you how to decode the frames (payloads) sent by the Squid Pro. Periodic Frames Periodic frames contain the data measured by

Before starting the installation of the SQUID Pro Rogowski, ensure that you use a 5VDC - 2A power supply positioned at the head to power the device. It is important to maintain and separate the wiring of Low Voltage Safety