The board is configured with the Tyness Configurator software Always use the latest version of the Tyness Configurator and check that your Tyness has the latest version of the firmware. If necessary, carry out an update. 1 – Click on “Config” of the

It is possible to read with the Tyness Configurator software the number of pulses counted by the Tyness. To do so, position the mouse on the image of the board, and the two counting indexes will display.

The Tyness sensor transmits its data in raw format. The section below shows you how to decode the frames (Payload) sent by the Tyness. Case of two inputs configured in counting : Case of two inputs configured in reading of status of inputs

Implementation Download the Tyness Configurator software available here. Run the program (no installation is necessary, available on PC with Windows 8 or later, Apple and Linux) Connect your computer to the Tyness jack using a MiniUSB cable. Power on the

EM EN 61000-6-2 :  Immunity for industrial environments EN 61000-6-3 :  Emissions for residential environments EN 55022 : Immunity IT equipment Radio EN 300220 Sécurité EN 61010 :  Immunity IT equipment

The TYNESS-MODULAR is a multifunction and modular sensor for building your ideal sensor system. It can be used for any application: monitoring a boiler room, analyzing power consumption of a production machine. Available in LoRa® or 4G. Take your Tyness and choose

References TYNESS-MODULAR-LORAWAN TyNess system main board for connecting up to 2 additional cards. Compatible LoRa® and LoRaWAN™. Operating with external power supply or an external battery pack. TYNESS-MODULAR-4G Same as the above version, with the 4G module providing direct communication with a WEB platform (e.g.

Mounting options Fixing magnet The TYNESS-FIX-AIMANT kit contains 2 round magnets, two solid metal washers and 2 fixing bolts (Torx T8 imprint). It makes it possible to fix the TYNESS on every on any magnetic surface or, for the non-magnetic surfaces, on the