Manufacturer cannot be held responsible for failure by user to comply with the instructions in this manual. Any service performed on this product must be completed by a qualified individual. Replacement of this product must be performed by a qualified individual. Failure to

The Ambiance sensor, thanks to its infrared sensor, is able to count the time during which a room, a corridor, or more generally an area is used.It transmits at regulatar interval this duration as well as its other measurements using

  The AMBIANCE is a complète LoRaWAN™ sensor that can measure five different things: temperature, humidity, rate of presence, brightness, and CO2 as an option. This product can run on batteries, which allows for more flexibility in its positioning. In order to measure

          13, Rue Maurice Jeandon            88100 Saint-Dié des Vosges           sales@ewattch.fr            www.ewattch.com

POWER SUPPLY Voltage : 3.6 VDC Life span on battery power : up to 5 years depending on use Voltage using external power : 5 to 12 VDC   MEASUREMENTS Temperature measurement : Temperature : -40 to 60℃                    

The AMBIANCE periodically send its sensor measurements via a  LoRaWAN™ radio link. In order to configure the AMBIANCE sensor for a LoRaWAN™ network, the unique encrypted identification code indicated on each product (DevEUI) is required. As well as the following two codes AppEUI and AppKey

Mise en place du capteur Fixation       This equipment can be mounted a variety of ways : screwing to the wall Option : using a double-sided adhesive In order to make installation easier, you must remove the rear part of the

    AMBIANCE-LORAWAN : LoRaWAN™ AMBIANCE sensor measuring temperature, humidity, rate of presence, brightness and, in option, CO2. Accessoires : PILE-LITH-AA 3.6V AA Lithium battery. Capacity 2.7 Ah ALIM-RAIL-5V Power supply 230 VAC - 5VDC. DIN RAIL mounting ALIM-BLOC-5V Power supply 230 VAC - 5 VDC compatible with power socket ALIM-12V-BLOC Power

CEM EN 61000-6-2 : Immunity for industrial environments EN 61000-6-3 : Emissions for residential environments EN 55022 : Immunity IT equipment Radio EN 30022 Sécurité EN 61010 :  Metering equipment

  Manufacturer cannot be held responsible for failure by user to comply with the instructions in this manual. Any service perfore on this product must be completed by a qualified individual. Replacement of this product must be performed by a qualified individual. Failure to