Le non-respect des indications de la présente notice ne saurait engager la responsabilité du constructeur. Ce produit doit être installé par un professionnel. Toute intervention sur le produit doit être effectuée par un professionnel. Le remplacement du produit doit être effectué par un

Radio Communication: LoRaWAN LoRaWAN Mode: OTAA ADR: enabled Confirmed Messages: disabled Periodic reconnection to LoRaWAN network: disabled Periodic LoRaWAN network test : activated Time between two radio transmissions of measurements: 60 minutes Product activation by magnet: enabled Digital input

he TYNODE sensor in its TYNODE-ANALOG version allows for the measurement of an analog signal in the range of 4-20mA or 0-10V. This can include measurements such as flow rate, pressure, or level. The resolution of the analog measurement is 10uA

The TYNODE sensor in its TYNODE-DIGITAL version allows for the reading of any type of pulse-emitting meters. It measures the number of pulses, the current state of the input, and the activation duration of the meter being monitored. The TYNODE-DIGITAL

The TYNODE sensor in its TYNODE-PT100 version allows for temperature measurement using 2 PT100 3-wire probes. The measurement range is from -100°C to 300°C. The configuration of this section is explained in the "Configuration" chapter.

Connecting to the Software The Tynode can be configured using the Tynode Configurator, a configuration software that can be downloaded from the website: ewattch-documentation.com. This software allows you to configure transmission periods, radio communication settings, and view the network status and sensor

The TYNODE is a battery-operated LoRa® sensor, designed for easy positioning. There are three versions of the product available, depending on the measurements required. It can be equipped with 2 digital inputs, 2 remote PT100 temperature probes, or an analog

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges sales@ewattch.fr www.ewattch.com

POWER SUPPLY Voltage : 1x 3.6V replaceable battery (2700mAh) included with the sensor Battery Life : Up to 10 years depending on the measurement reporting frequency Total Battery Capacity : 2.7 Ah MEASUREMENTS Note: Measurements taken outside the recommended conditions listed below