The SQUID Pro Rogowski comes equipped with user-friendly and intuitive configuration software, specifically designed to facilitate the updating and customization of your electrical sub-metering device. With its micro-USB connection, you can easily connect the SQUID Pro Rogowski to your computer

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com

MEASUREMENTS Energies: Active consumed, Active produced, Reactive positive, Reactive negative, Apparent Powers: Active, Reactive, Apparent Voltages : max 290V per phase (voltage between phase and neutral) Frequency : 50Hz or 60Hz Precision : 1% from 1A Class : 1 RADIO COMMUNICATION

The Squid Pro transmits its data in a raw format over various LoRaWAN public and private networks. The section below shows you how to decode the frames (payloads) sent by the Squid Pro. Periodic Frames Periodic frames contain the data measured by

Positioning of the product The product must be positioned in a way that does not make it difficult to operate disconnector devices. The product must be installed in an indoor environment. Mounting on DIN rail The product must be installed on a 35mm DIN

Electrical Sub-Metering with 12 Channels and LoRaWAN Wireless Communication Introducing the SQUID Pro, a revolutionary 12-channel energy meter for electrical sub-metering of your single-phase and three-phase installations. Capable of measuring and transmitting via LoRaWAN wireless communication: active power, reactive power, power factor,

KIT SQUID-PRO : Kits including a SQUID-PRO and all necessary accessories: 1 power supply with DIN rail mounting 230VAC-5VDC (ref.: ALIM-RAIL-5V) 1 magnetic antenna for external mounting (ref.: ANTMAGNSUP) Note: The kit does not include any current clamps. CURCLAMP-HC-S1 : Clip-on

EMC EN 61000-6-2 : Immunity for industrial environment EN 61000-6-3 : Emission for residential environment EN 55022 : IT equipment immunity Radio EN 300220 Safety EN 61010 :  IT equipment Logos European conformity logo Symbol of the Waste Electrical and Electronic Equipment directive

The manufacturer cannot be held responsible if the instructions in this manual are not followed. The product may only be installed by a professional. Any intervention on the product must be carried out by a professionnal. The product must be replaced by a