The board is configured with the Tyness Configurator software. Always use the latest version of the Tyness Configurator and validate that your Tyness has the latest version of the firmware. If necessary, carry out an update. Step 1 Click on “Config ” of

The alternative current board for Tyness Ewattch measures at high frequency, the currents on each of its 3 inputs. It enables to measure the current consumed by a device with great precision. The data made available for each of the reading inputs are

Allocation of the terminal blocks :

The Tyness and the board must be disconnected. The board must be installed carefully and with precision of connectors on the locations EXT.1 and/or EXT.2 of the Tyness. In the case of the board fitted with connectors, the wires of the inputs must be

The board is configured with the Tyness Configurator software. Always use the latest version of the Tyness Configurator and validate that your Tyness has the latest version of the firmware. If necessary, carry out an update. Click on “Config” of the board

It is possible to read with the Tyness Configurator software the values of the RMS current readings by the Tyness. To do so, position the mouse on the image of the board, and the readings will display. PayLoad Descriptions/strong> A Tyness transmits its data

Référence : TYNESS-OPT-PT100 TYNESS-OPT-PT1000 TYNESS-OPT-PT100 and TYNESS-OPT-PT1000 boards are additional boards comprising 4 temperature measurement inputs using 3-wire probes. The board is intended to be set up on our TYNESS sensors (ENERGY and MODULAR). It comprises 4 terminal blocks of type AVX series 9276, 3

The board is configured with the Tyness Configurator software. Always use the latest version of the Tyness Configurator and check that your Tyness has the latest version of the firmware. If necessary, carry out an update. Configuration steps 1 – Click on “Config” of

A Tyness fitted with a temperature measurement board transmits its data in a raw format on the different LoRaWAN networks. The section below shows you how to decode the frames (Payload) sent by the Tyness.

REFERENCE: TYNESS-OPT-ANA The TYNESS-OPT-ANA board is an additional board comprising 4 analog inputs configurable in 0-10V and 4-20 mA with common mass. It enables to read the information coming from any sensor with an analog 0-10V and/or 4-20 mA output. For example: an