Reading of the pulse indexes
It is possible to read with the Configurator software the number of pulses counted by the Tyness. To do so, you can check values on the left menu by selecting the board.
Description of payloads
The description of the radio exchange format is available on request.
Description and use
A Tyness can be equipped with an additional board for remote customer information link. It has a port for customer teleinformation connection of Enedis meters and two digital inputs. The TIC port (Teleinformation Customer) is compatible with the following meters: Blue,
Implementation and wiring
The Tyness and the card must be powered down. Attention: If the card is to be connected
Setting up the board
The board is set up using the Configurator software. Always use the latest version of Configurator and check that your Tyness has the latest firmware version. Update if necessary. 1 - Click on “Config” on the pulse card 2 - In the “Refresh frequency”
Dangers and warnings
The manufacturer cannot be held responsible if the instructions in this manual are not followed. Any intervention on the product must be carried out by a qualified person. The product must be replaced by a qualified person. The product must be used in
Validation of the remote customer information link
The Tic debug allows to validate the communication between the Tyness and the electric meter. 1 - Click on the "Start/Stop" button to start the diagnosis. 2 - The "return" button allows to return to the previous menu 3 - The result of
Contact
13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com
Contact
13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com