Il est possible de paramétrer l'Ambiance au moyen d'un logiciel de configuration par USB. Ce logiciel est téléchargeable ici. Cette section décrit son utilisation. Connection Commencez par démarrer le logiciel. Une fois le logiciel en route, connectez un câble micro-USB à l'Ambiance. Sélectionnez le port correspondant

A Tyness fitted with a OPTIC board transmits its data in a raw format on the different LoRaWAN networks. The section below shows you how to decode the frames (Payload) sent by the Tyness.

The TYNESS-OPT-OPTIC is an assembly comprised of an additional board containing 2 inputs for recording the light pulses supplied by an LED and a light pulse sensor. The board can be fitted with a second optional sensor with reference OPTIC-SENSOR The function is used

Board Dimensions : 1 additional standard location for Tyness Connectors : 2 connectors, 4 terminals type AVX series 9276 (2/10° to 8/10° - 18 to 24 AWG) rigid and flexible multi-strands Number of inputs : 2 OPTIC-SENNSOR inputs 4 wires Allocation of the terminal blocks : Pinout of the

Optic board :                                     Optic sensor :                                    

The board is configured with the Tyness Configurator software. Always use the latest version of the Tyness Configurator and validate that your Tyness has the latest version of the firmware. If necessary, carry out an update. Step 1 Click on “Config ” of

The alternative current board for Tyness Ewattch measures at high frequency, the currents on each of its 3 inputs. It enables to measure the current consumed by a device with great precision. The data made available for each of the reading inputs are

Allocation of the terminal blocks :

The Tyness and the board must be disconnected. The board must be installed carefully and with precision of connectors on the locations EXT.1 and/or EXT.2 of the Tyness. In the case of the board fitted with connectors, the wires of the inputs must be

The board is configured with the Tyness Configurator software. Always use the latest version of the Tyness Configurator and validate that your Tyness has the latest version of the firmware. If necessary, carry out an update. Click on “Config” of the board