Product installation

Positioning of the product

The product must be positioned in a way that does not make it difficult to operate disconnector devices.
The product must be installed in an indoor environment.

Product dimensions

Mounting on DIN rail

The product must be installed on a 35mm DIN rail fixed in an electrical panel.
Be careful to lock the housing on the DIN rail.

The DIN rail mount consists of 2 parts: a base and a movable and adjustable latch.
It is used to fix the Tyness horizontally or vertically on a DIN rail.

The Tyness can be removed from the DIN rail by manipulating the movable latch with a screwdriver like any other bracket of the same type. It is delivered with 2 mounting screws.

Adjustment of the tongue :

Depending on the positioning of the FIX-RAIL, the height of the latch must be adjusted in order to remain accessible.

When the upper part of the latch protrudes from the Tyness (for example with a Tyness in a low axial position), it can be cut with a wire cutter.