The TYNODE sensor in its TYNODE-DIGITAL version allows for the reading of any type of pulse-emitting meters. It measures the number of pulses, the current state of the input, and the activation duration of the meter being monitored. The TYNODE-DIGITAL

The TYNODE sensor in its TYNODE-PT100 version allows for temperature measurement using 2 PT100 3-wire probes. The measurement range is from -100°C to 300°C. The configuration of this section is explained in the "Configuration" chapter.

Connecting to the Software The Tynode can be configured using the Tynode Configurator, a configuration software that can be downloaded from the website: ewattch-documentation.com. This software allows you to configure transmission periods, radio communication settings, and view the network status and sensor

The TYNODE is a battery-operated LoRa® sensor, designed for easy positioning. There are three versions of the product available, depending on the measurements required. It can be equipped with 2 digital inputs, 2 remote PT100 temperature probes, or an analog

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges sales@ewattch.fr www.ewattch.com

POWER SUPPLY Voltage : 1x 3.6V replaceable battery (2700mAh) included with the sensor Battery Life : Up to 10 years depending on the measurement reporting frequency Total Battery Capacity : 2.7 Ah MEASUREMENTS Note: Measurements taken outside the recommended conditions listed below

The TYNODE sensor transmits its data in a raw format on public and private LoRaWAN™ networks and on the LoraEwattch network. To obtain documentation on how to decode the frames (Payload) sent by the TYNODE, please contact us directly.

Sensor installation This equipment can be installed: Using double-sided adhesive Screwed to the wall To simplify its installation, the Tynode has two flaps that provide access to the back of the Tynode for screwing it without having to open the enclosure. Description

TYNODE The TYNODE sensor is a LoRa® sensor that allows for various types of measurements. There are three versions available: temperature, pulse counting, and analog measurements. Its wireless and long-range LoRa® communication mode, along with its simplified configuration, make the Tynode the

EMC EN 61000-6-2 : Industrial environment immunity EN 61000-6-3 : Residential environment emissions EN 55022 : IT equipment immunity Radio EN 300220 Sécurité EN 61010: Measuring device The Tynode sensor is CE certified and RoHS compliant.