Technical Specifications
POWER SUPPLY Voltage : 24VDC +-5% Power : 1,2W Power cable length : 1 meter (39,07 inches) Power supply voltage Fluctuation : ±5% of rated voltage POWER CURRENT MEASUREMENTS BY OPENING PINS Maximum allowable current/sections : 10mm/75A, 16mm/100A, 24mm/300A, 36mm/600A Measurable circuit
Power supply of the sensor
The product must be powered by a 24VDC power supply and provide a minimum current of 1A. Connect the cable marked power supply of the product to this power supply. The red wire on the 24V and the black wire
Product installation
Positioning of the product The product must be positioned in a way that does not make it difficult to operate disconnector devices. The product must be installed in an indoor environment. Product dimensions Mounting on DIN rail The product must be installed on a
Product description
The TYNESS-FACTORY is a multifunctional LoRaWan radio sensor equipped with a remote omnidirectional magnetic antenna. It enables to perform : 3 current measurements by current clamps 2 temperature measurements by PT100 probes 2 digital input measurements 2 analog measurements 0-24V
Homologations and compliances
FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
Hazards and warnings
The manufacturer cannot be held responsible if the instructions in this manual are not followed. The product may only be installed by a professional. Any intervention on the product must be carried out by a professionnal. The product must be replaced by a
Nettoyage du produit
Le nettoyage du produit doit s'effectuer avec un chiffon sec, doux qui ne peluche pas. Enlevez les dépôts incrustés avec un chiffon légèrement humide. N’employez jamais de nettoyant, d’alcool ou de diluant.
Mesures
Le capteur permet d'effectuer différentes mesures. Voici ci-dessous les méthodes de câblage de chacune. Les caractéristiques techniques sont décrites en bas de documentation. Mesures de courant: La mesure de courant est effectuée au moyen des 3 pinces ampèremétriques ouvrante connectée au capteur
Contact
13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.fr www.ewattch.com