References
TYNESS-ALERTES-8: 1 x TYNESS with 8 indicator inputs (24 V AC/DC) 1 x magnetic antenna for mounting outside the cabinet (ref.: ANTMAGNSUP) 1 x 24V DIN rail power supply (ref.: ALIM-RAIL-24V)
Dangers et avertissements
Le non-respect des indications de la présente notice ne saurait engager la responsabilité du constructeur. Ce produit doit être installé par un professionnel, dans un environnement intérieur et de manière à ne pas rendre difficile la manœuvre du dispositif de sectionnement. Toute
Nettoyage du produit
The product must be cleaned using a soft, dry, lint-free cloth. Remove stubborn deposits with a slightly damp cloth. Never use cleaning agents, alcohol, or solvents.
Homologations et conformités
EUROPE EMC EN 61000-6-2: Immunity for industrial environments EN 61000-6-3: Emission standard for residential environments EN 55022: Immunity for IT equipment Radio EN 300220: Electromagnetic compatibility and radio spectrum matters for short-range devices Safety EN 61010: Electrical equipment for measurement and testing Logos
Configuration et paramétrage
Product configuration and updates are carried out using our product configuration software. This software enables both configuration and firmware updates of the product. The procedure below describes how to connect to the product. Implementation Power up the TyNess. Download the Configurator
Contact
13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com
Caractéristiques techniques
POWER SUPPLY Supply voltage: 5V±5% Power: 2.5W Current: 0.5A Power cable length: 1 meter Supply voltage fluctuation: ±5% of the nominal voltage ENVIRONMENTAL CONDITIONS Operating temperature: 5 to 60°C Storage temperature: -20°C to +70°C Operating humidity: 10 to 80%, non-condensing Maximum
Description des trames LoRaWAN (payloads)
The description of the radio communication format is available for download at the following address: Download frame format To facilitate the integration of products communicating via the LoRaWAN network, Ewattch has developed a frame decoder available at the following address: Frame
Installation et mise en œuvre
Prerequisites 1x TYNESS-MODBUS or TYNESS-MODBUS-4G: intelligent sensor communicating via LoRa or 4G Available space allowing the TYNESS-MODBUS to be mounted 50/60Hz 100 to 240 VAC power supply for wiring the 5VDC power supply Wiring Installation DIN Rail Mounting The TYNESS-FIX-RAIL consists of 2 parts: