Le TYNESS-FACTORY est un capteur radio LoRaWan multifonctions équipé d'une antenne déportée omnidirectionnelle magnétique. Il permet d'effectuer: 3 mesures de courant par pinces ampèremétriques 2 mesures de températures par sondes PT100 2 mesures d'entrées digitales 2 mesures analogiques 0-24V

FCC compliance statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

Le non-respect des indications de la présente notice ne saurait engager la responsabilité du constructeur. Ce produit doit être installé par un professionnel. Toute intervention sur le produit doit être effectuée par un professionnel. Le remplacement du produit doit être effectué par un

Radio Communication: LoRaWAN LoRaWAN Mode: OTAA ADR: enabled Confirmed Messages: disabled Periodic reconnection to LoRaWAN network: disabled Time between two radio transmissions of measurements: 60 minutes Product activation by magnet: enabled Digital input measurements: counting rising edges only

he TYNODE sensor in its TYNODE-ANALOG version allows for the measurement of an analog signal in the range of 4-20mA or 0-10V. This can include measurements such as flow rate, pressure, or level. The resolution of the analog measurement is 10uA

The TYNODE sensor in its TYNODE-DIGITAL version allows for the reading of any type of pulse-emitting meters. It measures the number of pulses, the current state of the input, and the activation duration of the meter being monitored. The TYNODE-DIGITAL

The TYNODE sensor in its TYNODE-PT100 version allows for temperature measurement using 2 PT100 3-wire probes. The measurement range is from -100°C to 300°C. The configuration of this section is explained in the "Configuration" chapter.

Connecting to the Software The Tynode can be configured using the Tynode Configurator, a configuration software that can be downloaded from the website: ewattch-documentation.com. This software allows you to configure transmission periods, radio communication settings, and view the network status and sensor