The AMBIANCE SENSOR transmits its data in a raw format over the different LoRaWAN™ public and private networks. The section below shows you how to decode the frames (PayLoad) sent by the AMBIANCE. Periodic frames The periodic frames contain the data measured

Installation of the sensor Mounting This device can be installed in several ways: screwed to the wall Option: perform double-sided mounting To simplify its installation, it is necessary to separate the rear part of the housing using a screwdriver. All you need to

AMBIANCE-LORAWAN AMBIANCE SENSOR LoRaWAN™ with reading of the temperature, humidity, level of presence, luminosity and optional CO2. It can be fitted with an alarm LED indicating a high CO2 level. This sensor has a version adding a survey feature enabling to obtain the

CEM EN 61000-6-2: Immunity for the industrial environment EN 61000-6-3: Emission for the residential environment EN 55022: Immunity IT equipment Radio EN 300220 Security EN 61010:  Measuring device

The product should be cleaned with a dry, soft, lint-free cloth. Remove encrusted deposits with a slightly damp cloth. Never use cleaners, alcohol or thinner.

The sensor allows up to 6 current measurements. The wiring method is shown below. Technical specifications are described in chapter 8 of this documentation.  

EUROPE EMC EN 61000-6-2 :  Immunity for industrial environment EN 61000-6-3 :  Emission for residential environment EN 55022 : IT equipment immunity Radio EN 300220 : Electromagnetic compatibility and radio spectrum for short-range devices Safety EN 61010 :  electrical test and measurement equipment Logos

Product configuration software is available. This allows you to configure and update the product. The procedure below describes how to connect to the product. Implementation Power the Tyness. Download the Configurator software. This software is available at the following link: https://www.ewattch.com/documentations-techniques/.

13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com

POWERSUPPLY Supply voltage : 5V±5% Power : 2,5W Current : 0,5A Supply cable length : 1 meter Supply voltage fluctuation : ±5% of nominal voltage ENVIRONMENTAL CONDITIONS Operating temperature : 5°C to 60°C Storage temperature : -20°C to +70°C Operating humidity