POWER SUPPLY Supply voltage: 24V±5% Power: 3W Current: 0.125A Power cable length: 1 meter Supply voltage fluctuation: ±5% of the nominal voltage ENVIRONMENTAL CONDITIONS Operating temperature: 5 to 60°C Storage temperature: -20°C to +70°C Operating humidity: 10 to 80%, non-condensing Maximum

The description of the radio communication format is available for download at the following address: Download frame formatTo facilitate the integration of products communicating via the LoRaWAN network, Ewattch has developed a frame decoder available at the following address: Frame

Prerequisites: 1x TYNESS-ALERTES-8: intelligent sensor communicating via LoRa Available space allowing the TYNESS to be mounted 50/60Hz 100 to 240 VAC power supply for wiring the 24VDC power supply Installation Configuration on Ewattch Cloud Once installed, the Tyness can be integrated into the

The TyNess Alerts is a panel indicator interface that enables instant monitoring of the status of your electrical cabinet indicator lights. In real time, it transmits information to EwattchCloud and triggers intelligent alerts as soon as an indicator changes state,

TYNESS-ALERTES-8: 1 x TYNESS with 8 indicator inputs (24 V AC/DC) 1 x magnetic antenna for mounting outside the cabinet (ref.: ANTMAGNSUP) 1 x 24V DIN rail power supply (ref.: ALIM-RAIL-24V)

Le non-respect des indications de la présente notice ne saurait engager la responsabilité du constructeur. Ce produit doit être installé par un professionnel, dans un environnement intérieur et de manière à ne pas rendre difficile la manœuvre du dispositif de sectionnement. Toute

The product must be cleaned using a soft, dry, lint-free cloth. Remove stubborn deposits with a slightly damp cloth. Never use cleaning agents, alcohol, or solvents.

EUROPE EMC EN 61000-6-2: Immunity for industrial environments EN 61000-6-3: Emission standard for residential environments EN 55022: Immunity for IT equipment Radio EN 300220: Electromagnetic compatibility and radio spectrum matters for short-range devices Safety EN 61010: Electrical equipment for measurement and testing Logos

Product configuration and updates are carried out using our product configuration software. This software enables both configuration and firmware updates of the product. The procedure below describes how to connect to the product. Implementation Power up the TyNess. Download the Configurator