Références
AMBIANCE-LITE : Capteur ENVIRONNEMENT mesurant la température et l'humidité, avec piles lithium 3.6V incluses, et communiquant en LoRaWAN™. Accessoires disponibles : PILE-LITH-AA Pile lithium 3.6V format AA. Capacité de 2.7 Ah ALIM-RAIL-5V Alimentation 230VAC - 5VCD. Fixation sur RAIL DIN ALIM-BLOC-5V Alimentation 230VAC - 5VDC
Homologations et conformités
CEM EN 61000-6-2 : Immunité pour l’environnement industriel EN 61000-6-3 : Émission pour l’environnement résidentiel EN 55022 : Immunité équipement IT Radio EN 30022 Sécurité EN 61010 : Appareil de mesurage
Dangers et avertissements
Le non-respect des indications de la présente notice ne saurait engager la responsabilité du constructeur. Toute intervention sur le produit doit être effectuée par une personne qualifiée. Le remplacement du produit doit être effectué par une personne qualifiée. L’appareil doit être utilisé selon les
Contact
13, Rue Maurice Jeandon 88100 Saint-Dié des Vosges FRANCE sales@ewattch.com +33(0)3.29.57.75.97 www.ewattch.com
Hazards and Warnings
Manufacturer cannot be held responsible for failure by user to comply with the instructions in this manual. Any service performed on this product must be completed by a qualified individual. Replacement of this products must be performed by a qualified individual. Failure to
Certifications and Conformities
CEM EN 61000-6-2 : Immunity for industrial environments EN 61000-6-3 : Emissions for residential environments EN 55022 : Immunity IT equipment Radio EN 30022 Sécurité EN 61010 : IT equipment
References
SQUID-HC-LORAWAN : The LoRaWAN™ version of the SQUID allows currents to be measured up to 600A. KIT-SQUID-HC-LORAWAN : Kits with a SQUID-HC-LORAWAN, and all necessary accessories: A power supply with attachment to a DIN rail 230 VAC-5VDC (ref: ALIM-RAIL-5V), and a magnetic antenna
Product description
The SQUID is a sensor equipped with 12 current measurement clamps which send measured current values by means of a wireless LoRaWAN link. The products sends the consumption index of the 12 clamps in Ah (in orange in the graph bellow)
Product installation
Mounting and disassembly This equipment must be installed on a DIN 35mm rail mounted horizontally on the electrical panel. Make sure to snap the box properly into the DIN rail. Make provision for the location of 5 modules to install the product on