{"id":416,"date":"2023-10-09T13:54:40","date_gmt":"2023-10-09T11:54:40","guid":{"rendered":"https:\/\/beta.ewattch-documentation.com\/?p=416"},"modified":"2023-10-24T16:17:04","modified_gmt":"2023-10-24T14:17:04","slug":"configuration-du-produit-3","status":"publish","type":"post","link":"https:\/\/ewattch-documentation.com\/?p=416","title":{"rendered":"Configuration du produit"},"content":{"rendered":"<p>Two configurations are available:<\/p>\n<h5><span style=\"color: #000000;\"><strong>LoRaWAN\u2122 mode<\/strong><\/span><\/h5>\n<div class=\"page\" title=\"Page 8\">\n<div class=\"section\">\n<div class=\"layoutArea\">\n<div class=\"column\">\n<p>The SQUID V2 periodically sends current measurements from its 12 measurement probes, in the form of consumption values(Ah), via a LoRaWAN radio link. To configure a SQUID V2 on a LoRaWAN network, you must use the following codes:<\/p>\n<ul>\n<li>DevEUI: This is a factory-programmed identifier that makes each object unique and is indicated on the label of each product. Example: 70B3D54750120168<\/li>\n<li>As well as the two codes AppEUI and AppKey provided with the sensors when you order.<span class=\"Apple-converted-space\">\u00a0<\/span><\/li>\n<\/ul>\n<p>These keys can be found in the email with the product keys, which is sent to you when your order is shipped, or in the Squid configuration software (see below).<\/p>\n<h5><span style=\"color: #000000;\"><strong>LoRa Ewattch mode<\/strong><\/span><\/h5>\n<\/div>\n<p>The SQUID V2 periodically sends current measurements from its 12 measurement probes, in the form of consumption values(Ah), via a Lora Ewattch radio link.<\/p>\n<p>To connect the SQUID V2 to the private Lora Ewattch network, simply configure the SQUID V2 in Lora mode and on the same communication channel as the concentrator (Toolbox or Tyness 4G) to which it will send its data.<\/p>\n<p>The SQUID V2 will automatically search for devices in its vicinity that are on the same communication channel as itself.<\/p>\n<p><strong>Here is how to configure your Squid V2 according to your preferences, via the configuration software:<\/strong><\/p>\n<h5><span style=\"color: #000000;\"><strong>Implementation<\/strong><\/span><\/h5>\n<\/div>\n<\/div>\n<\/div>\n<ol>\n<li>Download the configuration software, available in the<a href=\"\/?page_id=2181\"> &#8220;Downloads&#8221; section of the technical documentation<\/a>.<\/li>\n<li>Run the program (no installation required, available on Windows 8 or higher and Apple computers).<\/li>\n<li>Connect your computer to the miniUSB input on the front of the device, using a MiniUSB cable. <strong>Note: some USB cables only allow charging of mobile devices such as phones, and may not connect to a computer.<\/strong><\/li>\n<li>Power up the Squid V2: a new communication port will appear in the &#8220;Serial Port&#8221; dropdown menu. Select it.<\/li>\n<li>Click on the &#8220;Connect&#8221; button. You will arrive at the main page of the Squid Configurator.<span class=\"Apple-converted-space\">\u00a0<\/span><\/li>\n<\/ol>\n<div class=\"page\" title=\"Page 8\">\n<div class=\"section\">\n<div class=\"layoutArea\">\n<div class=\"column\">\n<img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11380 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/Hompage-1-canal-de-communication.png\" alt=\"\" width=\"543\" height=\"322\" \/><\/div>\n<h5><span style=\"color: #000000;\"><strong>Main page<\/strong><\/span><\/h5>\n<p>The main page gives you access to several functionalities and basic informations about the configuration of your Squid V2:<\/p>\n<ul>\n<li>In the top left corner, in the &#8220;Squid V2&#8221; box, the first gray box allows you to know directly in which communication mode the Squid V2 is currently in (here: LoRaWAN mode, which is the default mode).<span class=\"Apple-converted-space\">\u00a0<\/span><\/li>\n<li>Next to it, the &#8220;Energy&#8221; box allows you to consult the parameters related to energy measurements. We will come back to this later.<\/li>\n<li>At the bottom left, there are also several buttons:\n<ul>\n<li>&#8220;Save&#8221;: to confirm the modifications made to the configuration of your Squid V2.<\/li>\n<li>&#8220;Cancel&#8221;: to cancel the modifications made to the configuration of your Squid V2.<\/li>\n<li>&#8220;Mode (Simple\/Advanced)&#8221;: to change the configuration mode of your Squid V2. Generally, the &#8220;Simple&#8221; mode will be more than enough.<\/li>\n<li>&#8220;Update&#8221;: to update your Squid. (See below)<\/li>\n<li>&#8220;Disconnect&#8221;: to disconnect your product before removing the USB cable.<\/li>\n<\/ul>\n<\/li>\n<li>On the right, you have access to two panels: &#8220;Communication module&#8221; and &#8220;Energy Meter module&#8221;.\n<ul>\n<li>&#8220;The Communication module&#8221; will inform you about the main parameters related to the communication of your Squid V2:<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11382 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/Hompage-1-canal-de-communication-1.png\" alt=\"\" width=\"547\" height=\"325\" \/><\/p>\n<ul>\n<li style=\"list-style-type: none;\">\n<ul>\n<li>&#8220;The &#8220;Energy Meter module&#8221; will provide you with the main settings related to the measurements of your Squid V2:<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11386 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/Homepage-2-caract\u00e9ristiques-\u00e9nergie.png\" alt=\"\" width=\"553\" height=\"328\" \/><\/p>\n<h5><span style=\"color: #000000;\"><strong>Update<\/strong><\/span><\/h5>\n<p>An update of your Squid V2 may be necessary and is recommended, as our products are constantly evolving.<\/p>\n<p>To do this, first go to <a href=\"\/?page_id=2181\">the technical documentation<\/a> to download the update file, to be imported into the configuration software.<\/p>\n<p>Then, click on the &#8220;Update&#8221; button at the bottom left and then on &#8220;Select a file&#8221;.<\/p>\n<p>Choose the update file that you just downloaded from the technical documentation.<\/p>\n<p>Click on &#8220;Update product&#8221; to start the update. A window will appear to let you know that the update is complete.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11384 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/update.png\" alt=\"\" width=\"555\" height=\"329\" \/><\/p>\n<h5><span style=\"color: #000000;\"><strong>LoraWan Configuration<\/strong><\/span><\/h5>\n<p>To configure your Squid V2 in LoraWan mode, click on the box in the top left corner, symbolizing radio communication (green box in the image below).<\/p>\n<p>Then, open the &#8220;Mode&#8221; panel (1st panel) and check the &#8220;LoRaWAN&#8221; option.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11388 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/mode-de-communication-lorawan.png\" alt=\"\" width=\"548\" height=\"325\" \/><\/p>\n<\/div>\n<\/div>\n<\/div>\n<p>The second panel &#8220;LoRaWan Settings&#8221; allows you to:<\/p>\n<ol>\n<li>Adjust the LoRaWAN communication mode (OTAA or ABP);<\/li>\n<li>Adjust the datarate;<\/li>\n<li>Choose whether or not you want to receive a confirmation of successful data transmission (&#8220;Confirmed message&#8221;);<\/li>\n<li>Choose whether you want the Squid V2 to automatically restart a connection procedure every 7 days, which is ideal for the security of your data (&#8220;Periodic Rejoin&#8221;).&#8221;<span class=\"Apple-converted-space\">\u00a0<\/span><\/li>\n<\/ol>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11390 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/mode-de-communication-lorawan-options.png\" alt=\"\" width=\"550\" height=\"326\" \/><\/p>\n<p>The third panel &#8220;Network Keys&#8221; gives you access to the keys of your Squid V2, which are necessary for the proper provisioning of your Squid V2 on a LoRaWAN network (private or public).<span class=\"Apple-converted-space\">\u00a0<\/span><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11392 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/mode-de-communication-lorawan-cl\u00e9s.png\" alt=\"\" width=\"561\" height=\"331\" \/><\/p>\n<div class=\"page\" title=\"Page 8\">\n<div class=\"section\">\n<h5><span style=\"color: #000000;\"><strong>Lora Ewattch Configuration<\/strong><\/span><\/h5>\n<\/div>\n<\/div>\n<p>To configure your Squid V2 in LoRa mode, click on the radio communication icon in the top left corner (green box in the image below).<\/p>\n<p>Then open the &#8220;Mode&#8221; panel (first panel) and check the &#8220;LoRa&#8221; option.<\/p>\n<p>The second panel &#8220;LoRa Settings&#8221; allows you to define on which channel and with which power your Squid should try to communicate.<\/p>\n<div class=\"page\" title=\"Page 8\">\n<div class=\"section\">\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11394 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/mode-de-communication-lora-options.png\" alt=\"\" width=\"566\" height=\"336\" \/><\/p>\n<h5><span style=\"color: #000000;\"><strong>Energy parameter configuration<\/strong><\/span><\/h5>\n<p>To access the configuration parameters for the measurements of your Squid, click on the energy icon in the top left corner (green box in the ima ge below).<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11396 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/\u00e9nergie-vue-principale.png\" alt=\"\" width=\"574\" height=\"342\" \/><\/p>\n<\/div>\n<\/div>\n<p>The first panel &#8220;Refresh frequency&#8221; allows you to set the granularity of radio transmission of measurements from your Squid V2. By default, this is set to 10 minutes.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11398 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/\u00e9nergie-fr\u00e9quence.png\" alt=\"\" width=\"589\" height=\"346\" \/><\/p>\n<p>The second panel &#8220;Settings&#8221; allows you to configure the type of data transmission: V1 format or not (to keep the same message format as the Squid V1), and the transmission of instantaneous measurement (check &#8220;Send irms&#8221;). By default, these two boxes are not checked.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11400 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/\u00e9nergie-options.png\" alt=\"\" width=\"598\" height=\"355\" \/><\/p>\n<p>The third panel &#8220;Measurements&#8221; allows you to view in real-time the measurements taken by your Squid.<span class=\"Apple-converted-space\">\u00a0<\/span><\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\" wp-image-11402 aligncenter\" src=\"\/wp-content\/uploads\/SQUID_V2_-_English\/\u00e9nergie-mesures-live.png\" alt=\"\" width=\"609\" height=\"359\" \/><\/p>\n<p>When you have finished your configurations, don&#8217;t forget to click on the &#8220;Save&#8221; box in the left column to save all your changes. Otherwise, they will be lost.<\/p>\n<p>Click on &#8220;Disconnect&#8221; in the bottom left corner to properly disconnect the Squid.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Two configurations are available: LoRaWAN\u2122 mode The SQUID V2 periodically sends current measurements from its 12 measurement probes, in the form of consumption values(Ah), via a LoRaWAN radio link. To configure a SQUID V2 on a LoRaWAN network, you must [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[47],"tags":[],"class_list":["post-416","post","type-post","status-publish","format-standard","hentry","category-non-classe-fr"],"_links":{"self":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/416","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=416"}],"version-history":[{"count":3,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/416\/revisions"}],"predecessor-version":[{"id":2304,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/416\/revisions\/2304"}],"wp:attachment":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=416"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=416"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=416"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}