{"id":3760,"date":"2024-03-21T15:55:16","date_gmt":"2024-03-21T14:55:16","guid":{"rendered":"https:\/\/beta.ewattch-documentation.com\/?p=3760"},"modified":"2024-07-26T11:43:06","modified_gmt":"2024-07-26T09:43:06","slug":"setting-up-the-board-3","status":"publish","type":"post","link":"https:\/\/ewattch-documentation.com\/?p=3760","title":{"rendered":"Setting up the board"},"content":{"rendered":"<p>The board is set up using the Configurator software.<br \/>\nAlways use the latest version of Configurator and check that your Tyness<br \/>\nhas the latest firmware version. Update if necessary.<\/p>\n<p>1 &#8211; Click on \u201cConfig\u201d on the pulse card<br \/>\n2 &#8211; In the \u201cRefresh frequency\u201d box, define the data transmission period.<\/p>\n<ul>\n<li>If a digital input is configured for \u201cImpulse and cycle capture\u201d (cycle time measurement), select the number of rising edges per cycle..<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-large wp-image-4710\" src=\"https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112932-1024x608.png\" alt=\"\" width=\"1024\" height=\"608\" srcset=\"https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112932-1024x608.png 1024w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112932-300x178.png 300w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112932-150x89.png 150w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112932-768x456.png 768w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112932.png 1202w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<p>3 &#8211; In the \u201cPulse channels\u201d insert, define which pulse inputs will be active.<br \/>\nTo do so, click on 1 and\/or 2<\/p>\n<ul>\n<li>Define the operating mode for each input: \u201cMode\u201d insert<br \/>\nImpulse: returns the index of the number of pulses counted since product start-up.<br \/>\nproduct.<br \/>\nInput: returns the state of the input at the time the frame is sent (voltage detected<br \/>\nor not)<br \/>\nTime count: returns the duration during which voltage has been detected on the input<br \/>\nsince product start-up.<br \/>\nImpulse and cycle capture: returns the index of the number of pulses counted since the product was<br \/>\nas well as the time since the previous pulse. The \u201cpulse per capture cycle\u201d option lets you measure the time since a larger number of pulses.<\/li>\n<\/ul>\n<p class=\"aligncenter size-large wp-image-4710\"><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-large wp-image-4711\" src=\"https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112936-1024x608.png\" alt=\"\" width=\"1024\" height=\"608\" srcset=\"https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112936-1024x608.png 1024w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112936-300x178.png 300w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112936-150x89.png 150w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112936-768x456.png 768w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-112936.png 1202w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<p>4 &#8211; \u201cTic channel\u201d insert<\/p>\n<ul>\n<li>Baudrate selects the speed of the teletransmission link.<\/li>\n<li>The \u201cReverse polarity\u201d tick allows you to reverse the polarity of the tele-information link. This tick is only useful for SME-SMI meters.<\/li>\n<\/ul>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-large wp-image-4712\" src=\"https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113001-1024x608.png\" alt=\"\" width=\"1024\" height=\"608\" srcset=\"https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113001-1024x608.png 1024w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113001-300x178.png 300w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113001-150x89.png 150w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113001-768x456.png 768w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113001.png 1202w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<p>5 &#8211; The \u201cTest tic channel\u201d section checks that communication with the counter is correctly established. See the \u201cTic debug\u201d section of this documentation.<\/p>\n<p><img loading=\"lazy\" decoding=\"async\" class=\"aligncenter size-large wp-image-4713\" src=\"https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113008-1024x608.png\" alt=\"\" width=\"1024\" height=\"608\" srcset=\"https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113008-1024x608.png 1024w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113008-300x178.png 300w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113008-150x89.png 150w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113008-768x456.png 768w, https:\/\/ewattch-documentation.com\/wp-content\/uploads\/Capture-decran-2024-07-26-113008.png 1202w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/p>\n<p>6 &#8211; Once all values have been entered, validate by clicking on \u201cSave\u201d.<\/p>\n<p>If the operation was successful, a window displays \u201coperation successfull\u201d. Confirm by clicking on OK.<\/p>\n<p>Your card is now ready for use.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>The board is set up using the Configurator software. Always use the latest version of Configurator and check that your Tyness has the latest firmware version. Update if necessary. 1 &#8211; Click on \u201cConfig\u201d on the pulse card 2 &#8211; [&hellip;]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[47],"tags":[],"class_list":["post-3760","post","type-post","status-publish","format-standard","hentry","category-non-classe-fr"],"_links":{"self":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3760","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3760"}],"version-history":[{"count":1,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3760\/revisions"}],"predecessor-version":[{"id":4719,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3760\/revisions\/4719"}],"wp:attachment":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3760"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3760"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3760"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}