Network\u00a0connection process<\/strong><\/span><\/h5>\n\n- Our products try to connect to the network when they start.<\/li>\n
- If it does not work, they will retry every 24 hours until it works.<\/li>\n<\/ul>\n
Periodique network reconnection<\/strong><\/span><\/h5>\n\n- Our products restart a network connection procedure every 7 days.
\nThese reconnections improve security.
\nIndeed, reconnection to the network renews the encryption keys.<\/li>\n<\/ul>\nConfiguration of switches<\/strong><\/span><\/h5>\n![\"\"](\"\/wp-content\/uploads\/Environnement_Ambiance_Lite_-_English\/Capture-d\u2019\u00e9cran-2019-08-20-\u00e0-15.24.48.png\")
<\/p>\n
Payload\u00a0<\/strong>descriptions<\/b><\/span><\/h5>\nThe ENVIRONNEMENT sensor transmits its data in raw format on different public and private LoRaWAN\u2122 networks. The section below shows you to decode the frames (PayLoad) sent by this sensor.<\/p>\n
Periodic frames<\/strong><\/span><\/h5>\nThe periodic frames contain the data measured by the sensor ENVIRONNEMENT.<\/p>\n
Example of a periodic transmitted frame (HEXADECIMAL) :<\/p>\n
0005<\/span> 00<\/span> 6A0B<\/span> 04<\/span> 60<\/span><\/strong><\/p>\nExplanation of the frame structure :<\/p>\n
![\"\"](\"\/wp-content\/uploads\/Environnement_Ambiance_Lite_-_English\/Capture-d\u2019\u00e9cran-2019-08-20-\u00e0-15.29.06.png\")
<\/p>\n
Status frame<\/strong><\/span><\/p>\nThe status frames contain information about the sensor (battery level, firmware version..)<\/p>\n
Example of a transmitted (HEXADECIMAL) status frame :<\/p>\n
100A<\/span> 00<\/span>00<\/span>02<\/span>0401<\/span> 04<\/span>05<\/span> 08<\/span>3C00<\/span><\/strong><\/p>\nExplanation of the frame structure :<\/p>\n
![\"\"](\"\/wp-content\/uploads\/Environnement_Ambiance_Lite_-_English\/Capture-d\u2019\u00e9cran-2019-08-20-\u00e0-15.29.18.png\")
<\/p>\n","protected":false},"excerpt":{"rendered":"
The ENVIRONNEMENT periodically sens its sensor measurements via a LoRaWAN\u2122 radio link. In order to configure the ENVIRONNEMENT for a LoRaWAN\u2122 network, the encrypted identification code indicated on each product (DevEUI) is required. As well as the following two codes […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[47],"tags":[],"class_list":["post-3573","post","type-post","status-publish","format-standard","hentry","category-non-classe-fr"],"_links":{"self":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3573"}],"version-history":[{"count":0,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573\/revisions"}],"wp:attachment":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3573"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3573"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3573"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Periodique network reconnection<\/strong><\/span><\/h5>\n\n- Our products restart a network connection procedure every 7 days.
\nThese reconnections improve security.
\nIndeed, reconnection to the network renews the encryption keys.<\/li>\n<\/ul>\nConfiguration of switches<\/strong><\/span><\/h5>\n<\/p>\n
Payload\u00a0<\/strong>descriptions<\/b><\/span><\/h5>\nThe ENVIRONNEMENT sensor transmits its data in raw format on different public and private LoRaWAN\u2122 networks. The section below shows you to decode the frames (PayLoad) sent by this sensor.<\/p>\n
Periodic frames<\/strong><\/span><\/h5>\nThe periodic frames contain the data measured by the sensor ENVIRONNEMENT.<\/p>\n
Example of a periodic transmitted frame (HEXADECIMAL) :<\/p>\n
0005<\/span> 00<\/span> 6A0B<\/span> 04<\/span> 60<\/span><\/strong><\/p>\nExplanation of the frame structure :<\/p>\n
<\/p>\n
Status frame<\/strong><\/span><\/p>\nThe status frames contain information about the sensor (battery level, firmware version..)<\/p>\n
Example of a transmitted (HEXADECIMAL) status frame :<\/p>\n
100A<\/span> 00<\/span>00<\/span>02<\/span>0401<\/span> 04<\/span>05<\/span> 08<\/span>3C00<\/span><\/strong><\/p>\nExplanation of the frame structure :<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
The ENVIRONNEMENT periodically sens its sensor measurements via a LoRaWAN\u2122 radio link. In order to configure the ENVIRONNEMENT for a LoRaWAN\u2122 network, the encrypted identification code indicated on each product (DevEUI) is required. As well as the following two codes […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[47],"tags":[],"class_list":["post-3573","post","type-post","status-publish","format-standard","hentry","category-non-classe-fr"],"_links":{"self":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3573"}],"version-history":[{"count":0,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573\/revisions"}],"wp:attachment":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3573"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3573"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3573"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nThese reconnections improve security.
\nIndeed, reconnection to the network renews the encryption keys.<\/li>\n<\/ul>\n
Configuration of switches<\/strong><\/span><\/h5>\n<\/p>\n
Payload\u00a0<\/strong>descriptions<\/b><\/span><\/h5>\nThe ENVIRONNEMENT sensor transmits its data in raw format on different public and private LoRaWAN\u2122 networks. The section below shows you to decode the frames (PayLoad) sent by this sensor.<\/p>\n
Periodic frames<\/strong><\/span><\/h5>\nThe periodic frames contain the data measured by the sensor ENVIRONNEMENT.<\/p>\n
Example of a periodic transmitted frame (HEXADECIMAL) :<\/p>\n
0005<\/span> 00<\/span> 6A0B<\/span> 04<\/span> 60<\/span><\/strong><\/p>\nExplanation of the frame structure :<\/p>\n
<\/p>\n
Status frame<\/strong><\/span><\/p>\nThe status frames contain information about the sensor (battery level, firmware version..)<\/p>\n
Example of a transmitted (HEXADECIMAL) status frame :<\/p>\n
100A<\/span> 00<\/span>00<\/span>02<\/span>0401<\/span> 04<\/span>05<\/span> 08<\/span>3C00<\/span><\/strong><\/p>\nExplanation of the frame structure :<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
The ENVIRONNEMENT periodically sens its sensor measurements via a LoRaWAN\u2122 radio link. In order to configure the ENVIRONNEMENT for a LoRaWAN\u2122 network, the encrypted identification code indicated on each product (DevEUI) is required. As well as the following two codes […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[47],"tags":[],"class_list":["post-3573","post","type-post","status-publish","format-standard","hentry","category-non-classe-fr"],"_links":{"self":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3573"}],"version-history":[{"count":0,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573\/revisions"}],"wp:attachment":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3573"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3573"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3573"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/p>\nThe ENVIRONNEMENT sensor transmits its data in raw format on different public and private LoRaWAN\u2122 networks. The section below shows you to decode the frames (PayLoad) sent by this sensor.<\/p>\n
Periodic frames<\/strong><\/span><\/h5>\nThe periodic frames contain the data measured by the sensor ENVIRONNEMENT.<\/p>\n
Example of a periodic transmitted frame (HEXADECIMAL) :<\/p>\n
0005<\/span> 00<\/span> 6A0B<\/span> 04<\/span> 60<\/span><\/strong><\/p>\nExplanation of the frame structure :<\/p>\n
<\/p>\n
Status frame<\/strong><\/span><\/p>\nThe status frames contain information about the sensor (battery level, firmware version..)<\/p>\n
Example of a transmitted (HEXADECIMAL) status frame :<\/p>\n
100A<\/span> 00<\/span>00<\/span>02<\/span>0401<\/span> 04<\/span>05<\/span> 08<\/span>3C00<\/span><\/strong><\/p>\nExplanation of the frame structure :<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
The ENVIRONNEMENT periodically sens its sensor measurements via a LoRaWAN\u2122 radio link. In order to configure the ENVIRONNEMENT for a LoRaWAN\u2122 network, the encrypted identification code indicated on each product (DevEUI) is required. As well as the following two codes […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[47],"tags":[],"class_list":["post-3573","post","type-post","status-publish","format-standard","hentry","category-non-classe-fr"],"_links":{"self":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3573"}],"version-history":[{"count":0,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573\/revisions"}],"wp:attachment":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3573"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3573"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3573"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Explanation of the frame structure :<\/p>\n
<\/p>\n
Status frame<\/strong><\/span><\/p>\n The status frames contain information about the sensor (battery level, firmware version..)<\/p>\n Example of a transmitted (HEXADECIMAL) status frame :<\/p>\n 100A<\/span> 00<\/span>00<\/span>02<\/span>0401<\/span> 04<\/span>05<\/span> 08<\/span>3C00<\/span><\/strong><\/p>\n Explanation of the frame structure :<\/p>\n The ENVIRONNEMENT periodically sens its sensor measurements via a LoRaWAN\u2122 radio link. In order to configure the ENVIRONNEMENT for a LoRaWAN\u2122 network, the encrypted identification code indicated on each product (DevEUI) is required. As well as the following two codes […]<\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[47],"tags":[],"class_list":["post-3573","post","type-post","status-publish","format-standard","hentry","category-non-classe-fr"],"_links":{"self":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3573"}],"version-history":[{"count":0,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/posts\/3573\/revisions"}],"wp:attachment":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3573"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3573"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3573"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}<\/p>\n","protected":false},"excerpt":{"rendered":"