{"id":6987,"date":"2026-03-05T15:34:58","date_gmt":"2026-03-05T14:34:58","guid":{"rendered":"https:\/\/ewattch-documentation.com\/?page_id=6987"},"modified":"2026-03-05T15:36:51","modified_gmt":"2026-03-05T14:36:51","slug":"guide-multitech-demarrage-rapide-english","status":"publish","type":"page","link":"https:\/\/ewattch-documentation.com\/?page_id=6987&lang=en","title":{"rendered":"Guide : Multitech – D\u00e9marrage rapide – English"},"content":{"rendered":"

[vc_row full_width=”stretch_row” enable_grid_lines=””][vc_column][vc_column_text]<\/p>\n

Multitech – Quick Start<\/h1>\n

[\/vc_column_text][vc_empty_space]

\n\t
<\/div>\n<\/div>\n[vc_column_text]<\/p>\n

Objective<\/h2>\n

[\/vc_column_text][vc_column_text] This document describes the procedure for connecting to the MULTITECH web server with EWATTCH firmware in order to configure it and add it as a device in the EWATTCH Cloud. [\/vc_column_text][vc_column_text]<\/p>\n

Prerequisites<\/h2>\n

[\/vc_column_text][vc_column_text]<\/p>\n

Required for startup
\n<\/strong><\/h5>\n
    \n
  • Installation location with Ethernet or 4G coverage<\/li>\n
  • Internet access from the Ethernet network<\/li>\n
  • Power outlet near the Multitech<\/li>\n
  • Multitech in factory configuration<\/li>\n
  • Ewattch CLOUD account and structure
    \n<\/strong><\/em><\/li>\n<\/ul>\n

    [\/vc_column_text][vc_empty_space][vc_column_text]<\/p>\n

    Startup Procedure<\/h2>\n

    [\/vc_column_text][\/vc_column][\/vc_row][vc_row full_width=”stretch_row” enable_grid_lines=””][vc_column][vc_tta_accordion style=”modern” c_icon=”chevron” active_section=”0″ collapsible_all=”true”] [vc_tta_section title=”Step 1 – Direct Ethernet connection from PC to MULTITECH” tab_id=”1726498476828-4fac68c7-1da0″][vc_column_text css=””]<\/p>\n

    \n
    \n
    \n
    \n
      \n
    • Connect the power supply to the MULTITECH<\/li>\n
    • Configure the computer Ethernet connection with a fixed IP address: 192.168.1.100<\/li>\n
    • Check that the MULTITECH is fully started (Status LED cycle: 2 flashes in 1 second, LED off for 1 second…)<\/li>\n
    • Connect the Ethernet cable, open a web browser (Google Chrome is used in this documentation), and enter the following IP address in the navigation bar: http:\/\/192.168.1.197<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

      [\/vc_column_text][vc_empty_space][vc_single_image image=”5550″ img_size=”large”][vc_empty_space][vc_column_text css=””]<\/p>\n

      \n
      \n
      \n
      \n
        \n
      • Enter the login: admin<\/strong> and password: password<\/strong>. We strongly recommend changing these credentials upon first login. You now have access to the MULTITECH configuration.<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

        [\/vc_column_text][vc_empty_space][vc_single_image image=”5551″ img_size=”large”][vc_empty_space][\/vc_tta_section] [vc_tta_section title=”Step 1 – Ethernet connection via the network” tab_id=”1732193691710-f694e090-51db”][vc_column_text css=””]<\/p>\n

        \n
        \n
        \n
        \n
          \n
        • Connect the power supply to the MULTITECH<\/li>\n
        • Verify that the MULTITECH has fully started (Status LED cycle: 2 flashes in 1 second, LED off for 1 second…)<\/li>\n
        • Connect the Ethernet cable, open a web browser (Google Chrome is used in this documentation), and enter the following hostname in the address bar: mtcdt-ewattch-<last 3 parts of the MAC address in lowercase>.local<\/strong><\/li>\n<\/ul>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n

          [\/vc_column_text][vc_single_image image=”5552″ img_size=”large”][vc_column_text css=””]<\/p>\n

            \n
          • Enter the login: admin<\/strong> and password: password<\/strong>. We strongly recommend changing these credentials upon first login. You now have access to the MULTITECH configuration.<\/li>\n<\/ul>\n

            [\/vc_column_text][vc_single_image image=”5553″ img_size=”large”][vc_empty_space][\/vc_tta_section] [vc_tta_section title=”Step 2 – Adding the MULTITECH device in Ewattch Cloud” tab_id=”1726498476840-ef406093-7a90″][vc_column_text css=””]<\/p>\n

              \n
            • While still connected to the MULTITECH, log in to Ewattch Cloud https:\/\/ewattch.cloud<\/strong> and go to the desired structure. Click + Add a device<\/strong> in the devices<\/strong> section.<\/li>\n<\/ul>\n

              [\/vc_column_text][vc_empty_space][vc_single_image image=”5573″ img_size=”large” style=”vc_box_shadow”][vc_empty_space][vc_column_text]<\/p>\n

                \n
              • Enter the device name<\/strong>, the MAC address<\/strong> and the API key<\/strong> (these two pieces of information are available in the Home<\/strong> tab of the MULTITECH web server). Click save.<\/li>\n<\/ul>\n

                [\/vc_column_text][vc_empty_space][vc_row_inner enable_grid_lines=””][vc_column_inner width=”1\/2″][vc_single_image image=”5575″ img_size=”large” style=”vc_box_shadow”][\/vc_column_inner][vc_column_inner width=”1\/2″][vc_single_image image=”5556″ img_size=”large” style=”vc_box_shadow”][\/vc_column_inner][\/vc_row_inner][vc_empty_space][\/vc_tta_section] [vc_tta_section title=”Step 3 – Choosing the communication channel (Ethernet or GPRS)” tab_id=”1726498486180-42b689a0-cb3a”][vc_column_text]<\/p>\n

                By default, the communication channel is set to Ethernet. Below is the procedure to switch to GPRS:<\/p>\n

                  \n
                • Log in to the MULTITECH, click the Configuration<\/strong> tab then PLATFORM<\/strong>, and in the interface<\/strong> section select GPRS<\/strong>.<\/li>\n<\/ul>\n

                  [\/vc_column_text][vc_empty_space][vc_single_image image=”5557″ img_size=”large” style=”vc_box_shadow”][vc_empty_space][\/vc_tta_section] [vc_tta_section title=”Step 4 – Provisioning sensors via Ewattch Cloud” tab_id=”1726498487193-0d047ee9-e6bf”][vc_column_text]<\/p>\n

                  The MULTITECH must communicate with Ewattch Cloud. Otherwise provisioning will not be applied to the MULTITECH.<\/span><\/p>\n

                    \n
                  • Log in to Ewattch Cloud https:\/\/ewattch.cloud<\/strong>, go to the desired structure, and access the device to which sensors must be added.<\/li>\n<\/ul>\n

                    [\/vc_column_text][vc_empty_space][vc_single_image image=”5579″ img_size=”large” style=”vc_box_shadow”][vc_empty_space][vc_column_text]<\/p>\n

                      \n
                    • Click Product list<\/strong> then PROVISION<\/strong>.<\/li>\n<\/ul>\n

                      [\/vc_column_text][vc_empty_space][vc_single_image image=”5580″ img_size=”large” style=”vc_box_shadow”][vc_empty_space][vc_column_text]<\/p>\n

                        \n
                      • Select the sensor type (here EWATTCH sensor) then select the model.<\/li>\n<\/ul>\n

                        [\/vc_column_text][vc_row_inner enable_grid_lines=””][vc_column_inner width=”1\/2″][vc_single_image image=”5581″ img_size=”large” style=”vc_box_shadow”][\/vc_column_inner][vc_column_inner width=”1\/2″][vc_single_image image=”5582″ img_size=”large” style=”vc_box_shadow”][\/vc_column_inner][\/vc_row_inner][vc_empty_space][vc_column_text]<\/p>\n

                          \n
                        • Enter the desired name<\/strong>, then complete the fields DevEUI<\/strong>, AppEUI<\/strong> and AppKey<\/strong>, and click save.<\/li>\n<\/ul>\n

                          [\/vc_column_text][vc_empty_space][vc_single_image image=”5584″ img_size=”large” style=”vc_box_shadow”][vc_empty_space][vc_column_text]<\/p>\n

                            \n
                          • To view the sensor, click Product list<\/strong> on the gateway. Once the sensor is provisioned on the MULTITECH, its status will change to Provisioned<\/strong>.<\/li>\n<\/ul>\n

                            [\/vc_column_text][vc_empty_space][vc_single_image image=”5585″ img_size=”large” style=”vc_box_shadow”][vc_empty_space][\/vc_tta_section] [\/vc_tta_accordion][\/vc_column][\/vc_row]<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

                            [vc_row full_width=”stretch_row” enable_grid_lines=””][vc_column][vc_column_text] Multitech – Quick Start [\/vc_column_text][vc_empty_space][vc_column_text] Objective [\/vc_column_text][vc_column_text] This document describes the procedure for connecting to the MULTITECH web server with EWATTCH firmware in order to configure it and add it as a device in the EWATTCH Cloud. […]<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-6987","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/pages\/6987","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=6987"}],"version-history":[{"count":2,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/pages\/6987\/revisions"}],"predecessor-version":[{"id":6990,"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=\/wp\/v2\/pages\/6987\/revisions\/6990"}],"wp:attachment":[{"href":"https:\/\/ewattch-documentation.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=6987"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}