{"id":1195,"date":"2023-10-16T13:42:32","date_gmt":"2023-10-16T11:42:32","guid":{"rendered":"https:\/\/beta.ewattch-documentation.com\/?page_id=1195"},"modified":"2024-03-21T15:47:45","modified_gmt":"2024-03-21T14:47:45","slug":"carte-additionnelle-tyness-opt-pt100-english","status":"publish","type":"page","link":"https:\/\/ewattch-documentation.com\/?page_id=1195&lang=en","title":{"rendered":"Carte additionnelle TYNESS-OPT-PT100 – English"},"content":{"rendered":"

[vc_row full_width=”stretch_row” enable_grid_lines=””][vc_column][vc_row_inner enable_grid_lines=””][vc_column_inner][vc_column_text]<\/p>\n

Additional board Temperature<\/h1>\n

[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][vc_empty_space height=”40px”]

\n\t
<\/div>\n<\/div>\n[\/vc_column][\/vc_row][vc_row enable_grid_lines=””][vc_column][vc_empty_space height=”25px”][vc_column_text]
<\/span><\/a><\/span>
<\/div>
<\/div><\/div>
\n\t\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t<\/span>
  1. Hazards and Warnings<\/a><\/li>
  2. Description and usage<\/a><\/li>
  3. Technical specifications<\/a><\/li>
  4. Implementation<\/a><\/li>
  5. Settings<\/a><\/li>
  6. Payload descriptions<\/a><\/li>
  7. Contact<\/a><\/li><\/ol><\/div><\/div>

    1.<\/span>Hazards and Warnings<\/span> #<\/span>
    <\/div><\/h3>

    Manufacturer is not responsible for user\u2019s failure to comply with the instructions contained in this manual.
    Any service performed on this product must be completed by a qualified individual.
    Replacement of this product must be performed by a qualified individual.
    Failure to use this equipment in accordance with the specifications in this documentation could lead to a hazard.
    No parts in this device should be replaced or removed.
    Disconnect all power supplies before servicing the equipment.<\/p>\n

    Terms of use<\/strong><\/span><\/p>\n

    This board must exclusively be used with a Tyness product from the company\u00a0Ewattch.
    In the contrasting case, the company Ewattch shall not be held responsible\u00a0for any deterioration of the equipment.<\/p>\n<\/div>

    \u00c9tait\n-\nce\n\u00a0\nutile\n\u00a0\n?<\/span>\n\t\t\t\t\t\t Oui <\/a><\/span> \n\t\t\t\t\t\t Pas <\/a><\/span>\n\t\t\t\t\t\t<\/span>Sugg\u00e9rer\n\u00a0de\u00a0\nmodifier <\/a><\/span>
    \n\t\t\t\t\t<\/div>
    <\/div><\/div><\/div><\/div>

    2.<\/span>Description and usage<\/span> #<\/span>
    <\/div><\/h3>

    TYNESS-OPT-PT100 and TYNESS-OPT-PT1000 boards are additional boards comprising 4 temperature measurement inputs using 3-wire probes.<\/p>\n

    \"\"<\/p>\n

    \"\"<\/p>\n

    The board is intended to be set up on our TYNESS sensors (ENERGY and MODULAR)<\/strong><\/a>.<\/p>\n

    It comprises 4 terminal blocks of type AVX series 9276, 3 terminals.
    \nThe serigraphy of the printed circuit board specifies the function of the\u00a0terminal block.
    \nAt each transmission, the Tyness returns the instantaneous values of each\u00a0input.<\/p>\n

    The board is powered by the Tyness.<\/p>\n

    Note: reading correction factors cannot be configured in this board.<\/p>\n

    R\u00e9f\u00e9rence :<\/span>
    \nTYNESS-OPT-PT100
    \nTYNESS-OPT-PT1000
    \n<\/strong><\/span>SONDE-PT100_3M : <\/span><\/strong><\/span>PT100 probe \u00d8<\/span> 4mm with a cable length of 3m<\/span>
    \nSONDE-PT100_4M : <\/span><\/strong><\/span>PT100 probe \u00d8 4mm with a cable length of 4m<\/span>
    \nSONDE-PT100_6M : <\/span><\/strong><\/span>PT100 probe \u00d8 4mm with a cable length of 6m<\/span>
    \nSONDE-PT100_10M : <\/span><\/strong><\/span>PT100 probe \u00d8 4mm with a cable length of 10m<\/span>
    \nSONDE-PT100_20M : <\/span><\/strong><\/span>PT100 probe \u00d8 4mm with a cable length of 20m<\/span><\/p>\n<\/div>

    \u00c9tait\n-\nce\n\u00a0\nutile\n\u00a0\n?<\/span>\n\t\t\t\t\t\t Oui <\/a><\/span> \n\t\t\t\t\t\t Pas <\/a><\/span>\n\t\t\t\t\t\t<\/span>Sugg\u00e9rer\n\u00a0de\u00a0\nmodifier <\/a><\/span>
    \n\t\t\t\t\t<\/div>
    <\/div><\/div><\/div><\/div>

    3.<\/span>Technical specifications<\/span> #<\/span>
    <\/div><\/h3>

    Dimensions:<\/span><\/strong>
    \n1 additional standard location for Tyness<\/p>\n

    Connectors:<\/span><\/strong>
    \n4 connectors type AVX s\u00e9rie 9276, 3 terminals
    \n(2\/10\u00b0 \u00e0 8\/10\u00b0 \u2013 24 \u00e0 18 AWG)<\/p>\n

    \u25cf resolution: 0.01\u00b0C
    \n\u25cf accuracy: +-0.5\u00b0C
    \n\u25cf measures: -100\u00b0C to +300\u00b0C<\/p>\n

    Number of inputs:<\/span><\/strong>
    \n4 PT100 or PT1000 inputs 3 wires<\/p>\n

    Power supply:<\/span><\/strong>
    \nBy the TYNESS<\/p>\n

    Allocation of the terminal blocks:
    \n<\/span><\/strong><\/p>\n

    Pinout of the terminal blocks:
    \n<\/span><\/strong>
    \n<\/span><\/strong><\/p>\n<\/div>

    \u00c9tait\n-\nce\n\u00a0\nutile\n\u00a0\n?<\/span>\n\t\t\t\t\t\t Oui <\/a><\/span> \n\t\t\t\t\t\t Pas <\/a><\/span>\n\t\t\t\t\t\t<\/span>Sugg\u00e9rer\n\u00a0de\u00a0\nmodifier <\/a><\/span>
    \n\t\t\t\t\t<\/div>
    <\/div><\/div><\/div><\/div>

    4.<\/span>Implementation<\/span> #<\/span>
    <\/div><\/h3>

    First and foremost, the Tyness and the board must be disconnected.<\/p>\n

    The board must be inserted on the connectors on the locations EXT.1 and\/or EXT.2 of the Tyness.<\/p>\n

    The wires of the probes must be inserted into the terminal blocks.<\/p>\n

    In the case of an extension of the cable of the probes, we recommend the use of a shielded cable of type SYT1 and AWG20 between the \u201cfield\u201d connection terminal block and the \u201cboard\u201d terminal blocks.<\/p>\n<\/div>

    \u00c9tait\n-\nce\n\u00a0\nutile\n\u00a0\n?<\/span>\n\t\t\t\t\t\t Oui <\/a><\/span> \n\t\t\t\t\t\t Pas <\/a><\/span>\n\t\t\t\t\t\t<\/span>Sugg\u00e9rer\n\u00a0de\u00a0\nmodifier <\/a><\/span>
    \n\t\t\t\t\t<\/div>
    <\/div><\/div><\/div><\/div>

    5.<\/span>Settings<\/span> #<\/span>
    <\/div><\/h3>

    The board is configured with the Configurator<\/span> software.<\/p>\n

    Always use the latest version of the Configurator and check that your Tyness has the latest version of the firmware. If necessary, carry out an update.<\/p>\n

    Configuration steps<\/span><\/strong><\/h5>\n

    1 \u2013 Click on \u201cConfig<\/span><\/strong>\u201d of the board\"\"<\/p>\n

    2 \u2013 In the insert \u201cEnabled channels<\/span>\u201d, define which inputs will be active.
    \nTo do so, select:
    \n\u201c1<\/span>\u201d and\/or \u201c2<\/span>\u201d and\/or \u201c3<\/span>\u201d and\/or\u00a0\u201c4<\/span>\u201d<\/p>\n

    3 \u2013 Define the period of sending of the readings: \u201cFrequency<\/span>\u201d<\/p>\n

    4 \u2013 Once all the values are entered, validate by clicking on \u201cSave<\/span>\u201d on the left menu. If the operation is successful, a window displays \u201coperation successful<\/span>\u201d.<\/p>\n

    Validate by clicking on OK<\/span><\/p>\n

    Your board is ready to operate.<\/p>\n

    Verification of the readings<\/strong><\/span><\/h5>\n

    You can check readed values on the left menu when you select PT100 board.<\/p>\n<\/div>

    \u00c9tait\n-\nce\n\u00a0\nutile\n\u00a0\n?<\/span>\n\t\t\t\t\t\t Oui <\/a><\/span> \n\t\t\t\t\t\t Pas <\/a><\/span>\n\t\t\t\t\t\t<\/span>Sugg\u00e9rer\n\u00a0de\u00a0\nmodifier <\/a><\/span>
    \n\t\t\t\t\t<\/div>
    <\/div><\/div><\/div><\/div>

    6.<\/span>Payload descriptions<\/span> #<\/span>
    <\/div><\/h3>

    A Tyness fitted with a temperature measurement board transmits its data in a raw format on the different LoRaWAN networks. The section below shows you how to decode the frames (Payload) sent by the Tyness.\"\"<\/p>\n<\/div>

    \u00c9tait\n-\nce\n\u00a0\nutile\n\u00a0\n?<\/span>\n\t\t\t\t\t\t Oui <\/a><\/span> \n\t\t\t\t\t\t Pas <\/a><\/span>\n\t\t\t\t\t\t<\/span>Sugg\u00e9rer\n\u00a0de\u00a0\nmodifier <\/a><\/span>
    \n\t\t\t\t\t<\/div>
    <\/div><\/div><\/div><\/div>

    7.<\/span>Contact<\/span> #<\/span>
    <\/div><\/h3>

    \"\"<\/p>\n

    13, Rue Maurice Jeandon
    \n88100 Saint-Di\u00e9 des Vosges
    \nFRANCE
    \nsales@ewattch.com
    \n+33(0)3.29.57.75.97
    \nwww.ewattch.com<\/strong><\/span><\/a><\/p>\n<\/div>

    \u00c9tait\n-\nce\n\u00a0\nutile\n\u00a0\n?<\/span>\n\t\t\t\t\t\t Oui <\/a><\/span> \n\t\t\t\t\t\t Pas <\/a><\/span>\n\t\t\t\t\t\t<\/span>Sugg\u00e9rer\n\u00a0de\u00a0\nmodifier <\/a><\/span>
    \n\t\t\t\t\t<\/div>
    <\/div><\/div><\/div><\/div>
    Help Guide Powered by Documentor<\/a><\/div><\/div>
    \n\t\t\t\t<\/a>\n\t\t\t\t
    \n\t\t\t\t\t
    Sugg\u00e9rer\n\u00a0de\u00a0\nmodifier\n\t\t\t\t\t<\/div>\n\t\t\t\t\t
    \n\t\t\t\t\t\t\n\t\t\t\t\t<\/div>
    \n\t\t\t\t\t\t\t\n\t\t\t\t\t\t<\/div>
    \n\t\t\t\t\t\t\t \n\t\t\t\t\t\t<\/div>
    \n\t\t\t\t\t\t\t