1.Hazards and Warnings
Manufacturer cannot be held responsible for failure by user to comply with the instructions in this manual.
Any service performed on this product must be completed by a qualified individual.
Replacement of this product must be performed by a qualified individual.
Failure to use this equipment in accordance with the specifications in this documentation could lead to a hazard.
No parts in this device should be replaced or removed.
Disconnect all power supplies before servicing the equipment.
2.Certifications and Conformities
- EN 61000-6-2 : Immunity for industrial environments
- EN 61000-6-3 : Emissions for residential environments
- EN 55022 : Immunity IT equipment
- EN 30022
- EN 61010 : Metering equipment
ENVIRONNEMENT sensor measuring temperature and humidity, including lithium 3.6V batteries, and communicating via LoRaWAN™.
3.6V AA Lithium battery. Capacity 2.7 Ah
Power supply 230 VAC – 5 VDC. DIN RAIL mounting
Power supply 230 VAC – 5 VDC compatible with power socket
Power supply 230 VAC – 12 VDC compatible with power socket
- AMBIANCE-OPT-CO2 :
Option including the CO2 module, AMBIANCE and ENVIRONNEMENT sensor modifications and a 12V DC 500mA power supply unit
- AMB-ENV-OPT-ALIM-EXT :
ENVIRONNEMENT modifications allowing the use of an external power supply from 5VDC to 12VDC
The ENVIRONNEMENT is a complete LoRaWAN™ sensor that can measure three different things: temperature and humidity, and CO2 as an option.
This product can run on batteries, which allows for more flexibility in its positioning.
In order to measure CO2, an EE893 sensor made by E+E must be connected to the ENVIRONNEMENT.
Its measuring cell uses dual-wavelength E+E infrared technology NDIR, which compensates for the effects of aging, is particularly resistant to pollution and offers great long-term stability.
The Environnement sensor is configurable via its software (available on request): transmission periods, radio communication parameters, network status, sensor measurement.
Caution : Measuring CO2 requires the use of an external power supply and cannot be run on batteries.
Installation of the sensor
This equipment can be mounted a variety of ways :
- screwing to the wall
- Option : using a double-sided adhesive
In order to make installation easier, you must remove the rear part of the chassis using a screwdriver.
The last step is to screw the chassis to the wall (or mount it using a double-sided adhesive) and reassemble the front part fixed to the rear part thus mounted
The ENVIRONNEMENT periodically sens its sensor measurements via a LoRaWAN™ radio link.
In order to configure the ENVIRONNEMENT for a LoRaWAN™ network, the encrypted identification code indicated on each product (DevEUI) is required.
As well as the following two codes AppEUI and AppKey provided with your order
Network connection process
- Our products try to connect to the network when they start.
- If it does not work, they will retry every 24 hours until it works.
Periodique network reconnection
- Our products restart a network connection procedure every 7 days.
These reconnections improve security.
Indeed, reconnection to the network renews the encryption keys.
Configuration of switches
The ENVIRONNEMENT sensor transmits its data in raw format on different public and private LoRaWAN™ networks. The section below shows you to decode the frames (PayLoad) sent by this sensor.
The periodic frames contain the data measured by the sensor ENVIRONNEMENT.
Example of a periodic transmitted frame (HEXADECIMAL) :
0005 00 6A0B 04 60
Explanation of the frame structure :
The status frames contain information about the sensor (battery level, firmware version..)
Example of a transmitted (HEXADECIMAL) status frame :
100A 0000020401 0405 083C00
Explanation of the frame structure :
- Voltage : 3.6 VDC
- Life span on battery powers : 5 years*
- Voltage using external power : 5 to 12 VDC
Temperature : -40 to 60℃ Accuracy : 0,5℃
Humidity : 0 to 100% Accuracy : 2%
Warning: Measurements performed outside of recommended operating conditions as listed below can damage the product.
- Frequency : 868MHz
- Unique serial number : yes
- Maximum transmission power : 25mW
- Communication range : up to15km in open areas**
*With one transmission per hour
**Depending on the environnement
- Area of application : Indoors
- Operating temperature : from 5 to 60℃
- Storage temperature : from -20℃ to +70℃
- Operating humidity : de 10 to 80%, without condensation
- Maximum altitude : 2000 m
- Dimensions (H X L X D) : 86 x 86 x 25.5 mm
- Chassis material : ABS
- Weight : 80g (without batteries)
- Protection rating : IP20
13, Rue Maurice Jeandon
88100 Saint-Dié des Vosges