Environnement / Ambiance Lite

1.Hazards and Warnings #

Manufacturer cannot be held responsible for failure by user to comply with the instructions in this manual.
Any service performed on this product must be completed by a qualified individual.
Replacement of this product must be performed by a qualified individual.
Failure to use this equipment in accordance with the specifications in this documentation could lead to a hazard.
No parts in this device should be replaced or removed.
Disconnect all power supplies before servicing the equipment.

Was this helpful? Yes No

Suggest edit

2.Certifications and Conformities #

CEM

EN 61000-6-2 : Immunity for industrial environments
EN 61000-6-3 : Emissions for residential environments
EN 55022 : Immunity IT equipment

Radio

EN 30022

Sécurité

EN 61010 : Metering equipment

Was this helpful? Yes No

Suggest edit

3.References #

AMBIANCE-LITE :
ENVIRONNEMENT sensor measuring temperature and humidity, including lithium 3.6V batteries, and communicating via LoRaWAN™.

Accessories :

PILE-LITH-AA
3.6V AA Lithium battery. Capacity 2.7 Ah
ALIM-RAIL-5V
Power supply 230 VAC – 5 VDC. DIN RAIL mounting
ALIM-BLOC-5V
Power supply 230 VAC – 5 VDC compatible with power socket
ALIM-12V-BLOC
Power supply 230 VAC – 12 VDC compatible with power socket

Option :

AMBIANCE-OPT-CO2 :
Option including the CO2 module, AMBIANCE and ENVIRONNEMENT sensor modifications and a 12V DC 500mA power supply unit
AMB-ENV-OPT-ALIM-EXT :
ENVIRONNEMENT modifications allowing the use of an external power supply from 5VDC to 12VDC

Was this helpful? Yes No

Suggest edit

4.Product description #

The ENVIRONNEMENT is a complete LoRaWAN™ sensor that can measure three different things: temperature and humidity, and CO2 as an option.

This product can run on batteries, which allows for more flexibility in its positioning.
In order to measure CO2, an EE893 sensor made by E+E must be connected to the ENVIRONNEMENT.

Its measuring cell uses dual-wavelength E+E infrared technology NDIR, which compensates for the effects of aging, is particularly resistant to pollution and offers great long-term stability.

The Environnement sensor is configurable via its software (available on request): transmission periods, radio communication parameters, network status, sensor measurement.

Caution : Measuring CO2 requires the use of an external power supply and cannot be run on batteries.

Was this helpful? Yes No

Suggest edit

5.Product installation #

Installation of the sensor

Mounting

This equipment can be mounted a variety of ways :

screwing to the wall
Option : using a double-sided adhesive

In order to make installation easier, you must remove the rear part of the chassis using a screwdriver.
The last step is to screw the chassis to the wall (or mount it using a double-sided adhesive) and reassemble the front part fixed to the rear part thus mounted

Was this helpful? Yes No

Suggest edit

6.Radio communication #

The ENVIRONNEMENT periodically sens its sensor measurements via a LoRaWAN™ radio link.
In order to configure the ENVIRONNEMENT for a LoRaWAN™ network, the encrypted identification code indicated on each product (DevEUI) is required.

As well as the following two codes AppEUI and AppKey provided with your order

Network connection process

Our products try to connect to the network when they start.
If it does not work, they will retry every 24 hours until it works.

Periodique network reconnection

Our products restart a network connection procedure every 7 days.
These reconnections improve security.
Indeed, reconnection to the network renews the encryption keys.

Configuration of switches

Payload descriptions

The ENVIRONNEMENT sensor transmits its data in raw format on different public and private LoRaWAN™ networks. The section below shows you to decode the frames (PayLoad) sent by this sensor.